Panasonic YP-060PF Operating Instructions Manual page 27

8 Settings and Operations
(continue)
(3) Selection of base metal material.
Turn the dial, selecting material, press the
DECIDE button.
Please select from the materials listed on the
upper and lower side being lit by the 7-segment
LED of the digital display window.
(4) Select base metal thickness.
Turn the dial to select base metal thickness, and
then press the DECIDE button.
When digital display window shows 「―――」,
press DECIDE button to return to the material
selection mode.
(5) Select manual / automatic.
·「Hnd」: Applicable to the manual cutting.
·「Aut」: Applicable to the automatic SPM cutting.
·When digital display window shows 「―――」,
press DECIDE button to return to base metal
thickness selection mode.
23