Cooper Lighting WaveLinx Lite User And Programming Manual page 58

Select the site
6: In the list of devices, locate the device to command. If needed, use the identify icon '
then tap the device to open the device details.
7: In the 'Dimmable' details page use the slider to adjust the light level for the desired device.
If needed, use 'identify' to
locate the correct device
Tap device
58 www.cooperlighting.com
Select the area
Exiting the details page
will cause light to resume
zone level
Not connected
Connected
Verify network
connection
Select a zone
' to flash the loads until the correct one is found, and
Adjust the device light
level using slider or
entry field
User Manual: WaveLinx Lite (1.5)