Modify Default Behavior After Provisioning; Modify Areas; Rename An Area - Cooper Lighting WaveLinx Lite User And Programming Manual

User Manual: WaveLinx Lite (1.5)

Modify Default Behavior After Provisioning

Once an area has been defined, the default behavior can be modified if different operation is expected. This section discusses how to:

• Modify areas

• Modify zones
• Modify devices
• Modify occupancy sets
• Modify wallstations
• Modify scene light levels
• Calibrate daylight sets
Modify Areas
Once created, areas can be renamed or deleted. This section discusses how to perform these functions.

Rename an Area

An area can be renamed at any time. This process does not require connection to the internet or a connection to the WaveLinx Lite
device/network.
To rename an area:
1: Open the WaveLinx Lite Mobile Application.
2: In the site list, select a site.
3: In the area list or in an area's screen, select the pencil icon ' '.
4: Change the area name, and then tap 'Update'.
Select the site
Select the edit
icon
Tap 'Update'
Update name
with changes
www.cooperlighting.com 29