Part 2: Assign And Unassign Zones To Occupancy Sets - Cooper Lighting WaveLinx Lite User And Programming Manual

Tap 'Occupancy'

Part 2: Assign and Unassign Zones to Occupancy Sets

If zones have been manually created, it will be necessary to assign them to an occupancy set for occupancy commands to operate. One
occupancy set can have multiple zones assigned to it if the zones need to work together as a group.
Internet connection is not required to assign zones to occupancy sets but connection to the WaveLinx Lite device/network is required. The
mobile device will need to be in range and as close as possible (within 60 feet) of any WaveLinx Lite device that belongs to the area.
To assign or unassign zones:
1: With the mobile device, stand as close as possible to the WaveLinx device that has been provisioned in the area (within 60 feet).
2: Open the WaveLinx Lite Mobile Application.
3: In the site list, select a site.
4: In the area list, select the desired area.
5: Tap on the 'Occupancy' option to open the occupancy set list.
Select the site
24 www.cooperlighting.com
Tap '+' to add an
occupancy set
Select the area
Tap to rename
Created occupancy
sets
Tap 'Occupancy'
User Manual: WaveLinx Lite (1.5)