Cooper Lighting WaveLinx Lite User And Programming Manual page 44

Select the site
6. Tap on the desired occupancy set to open the occupancy set details, and then tap on 'Zones'.
7. If any zones are in the 'Assigned Zones' section, tap '
across the screen as the zone is removed. Wait a few minutes after zones are removed before moving on to the next step.
8. Next, at the top of the occupancy set details page, select the delete icon '
Note: If errors or alert icons '
1
the errors before proceeding.
Tap the
occupancy set
44 www.cooperlighting.com
Select the area
' next to each zone to remove zone assignment. Informational messages will scroll
' display after this step, refer to the section "Resolve Mobile Application Communication Issues" on page 71 to resolve
Tap 'Zones'
Remove assigned
zones
Not connected
Connected
Verify network
connection
Tap 'Occupancy'
' and then confirm the deletion.
Tap the 'Delete'
icon
User Manual: WaveLinx Lite (1.5)
1
1
Tap 'Delete'