Modify Scene Light Levels - Cooper Lighting WaveLinx Lite User And Programming Manual

User Manual: WaveLinx Lite (1.5)
7. Use the action dropdown to select the desired action and then define the parameters required for that action. Parameters will change based
on action type selected.
Select Scene:
• Choose scene command
Raise or Lower Level:
• Select zone or all zones
8: Tap 'Save' to send the changes to the wallstation.
9: Repeat as needed for additional wallstation buttons and wallstations.

Modify Scene Light Levels

The WaveLinx Lite system allows for seven scenes per area. In WaveLinx Lite (1.5), scenes can be issued by wallstation buttons or by the
system administrator from the WaveLinx Lite Mobile Application.
Within an area, the default zone and any created zones will be automatically assigned to the following scene level response:
Scene
OFF
Scene 1
Scene 2
Scene 3
Scene 4
Scene 5
Scene 6
Light Level Response
All Dimmable Zones
0%
100%
70%
50%
30%
10%
1%
Zone Level:
Select zone or all zones
•
• Define light level
No Action
• No parameters
www.cooperlighting.com 47