Move Devices To Different Zones - Cooper Lighting WaveLinx Lite User And Programming Manual

User Manual: WaveLinx Lite (1.5)
To change the parameters,
1: Bring the mobile device within range (within 60 feet) of any provisioned WaveLinx Lite device in the desired area.
2: Ensure that the mobile device Bluetooth is turned on, and then open the WaveLinx Lite Mobile Application.
3: In the site list, select a site.
4: In the area list, select the desired area. After a short delay, verify that the area shows that the mobile application is connected to the network.
Tap on the icon if it is necessary to refresh the connection.
5: In the zone list, select the zone.
6: Tap edit ' ' to open the zone name and parameters.
7: Change the zone name, update the parameters, and then tap 'Update'.
Select the site

Move Devices to Different Zones

If a device that was assigned to a zone during provisioning needs to be moved to a different zone, follow the steps below.
To move a device to a different zone:
1: Bring the mobile device within range (within 60 feet) of any provisioned WaveLinx Lite device in the desired area.
2: Ensure that the mobile device Bluetooth is turned on, and then open the WaveLinx Lite Mobile Application.
3: In the site list, select a site.
4: In the area list, select the desired area. After a short delay, verify that the area shows that the mobile application is connected to the network.
5: In the zone list, select the zone.
Select the site
Select the zone
Select the area
Not connected
Connected
Verify network
connection
Select the edit icon
Select the area
Select the zone
Make changes
and update
Not connected
Connected
Verify network
connection
www.cooperlighting.com 31