Cooper Lighting WaveLinx Lite User And Programming Manual page 27

User Manual: WaveLinx Lite (1.5)
9. The next step may vary slightly depending on the type of device being provisioned.
• If the device is a wallstation, once it finishes provisioning, the wallstation will appear in the 'Devices in Area' section.
• If the device is a control device (light fixtures with a fixture mount or integrated sensor, for example), and the area has more than one
zone, select the zone it should operate with from the list (If only using the default zone, the device will automatically be assigned to the
zone without need to select). Once provisioning is complete, the device will appear in the selected zone.
Wallstation
Wallstation appears
in 'Devices in Area'
10: (Optional/Recommended) Tap the device to open the details page and then tap edit '
easier to recognize in the mobile application.
Wallstation
Tap device
Fixture Mount or Integrated Sensor
Select edit
Fixture Mount or Integrated Sensor
For fixture mount or
integrated sensor, select
the desired zone
' to give the device a descriptive name making it
Tap device
Select edit
Device appears in
the zone
Enter desired name
Tap 'Save'
www.cooperlighting.com 27