Step 3: Provision An Area's First Device - Cooper Lighting WaveLinx Lite User And Programming Manual

Step 3: Provision an Area's First Device

In order for some of the mobile application options to become accessible, at least one device needs to belong to the area. The process of
joining a WaveLinx Lite device to an area (network) is called provisioning. This section will walk through the provisioning of the first device in
the area. For best results, wait to provision additional devices until after "Step 5: Manage the Area Occupancy Sets" has been completed.
IMPORTANT: The mobile device will need to be in range and as close as possible (within 60 feet) to the WaveLinx
Lite device being provisioned. Internet connection is not necessary.
To provision the first device:
1: Select a WaveLinx Lite device to be the first device to provision. With the mobile device, stand as close as possible to the chosen WaveLinx
Lite device (within 60 feet).
2: Verify that the device is displaying the correct out-of-the box and LED behavior for an unprovisioned device as described on the device's
reference sheet in the "WaveLinx Lite Device Reference Sheets" section beginning on page 6.
3: Ensure that the mobile device Bluetooth is turned on, and then open the WaveLinx Lite Mobile Application.
4: In the site list, select a site.
5: In the area list, select the area where the device should be provisioned.
6: In the area details, scroll down to the 'Unassigned Devices' list, and then tap the refresh icon '
Found devices will appear in the 'Unassigned Devices' section, separated by device type. This display is static and will not change until another
scan command is processed.
20 www.cooperlighting.com
Select the site
Select the area
User Manual: WaveLinx Lite (1.5)
' to start a device scan.
Tap to start scan