Product Design; Display Components - Festo CPX-E-EP Translation Of The Original Instructions

Function
When using the "QuickConnect" function, crossover detection (auto MDI/MDI-X) must be deactivated,
and the transmission rate and duplex mode of the network connections to the bus module and to the
higher-order controller must be set to be identical.
The IO-Link master module CPX-E-4IOL-... does not support the "QuickConnect" function.
2.1.5

Product Design

Fig. 2 Product design
2.1.6

Display Components

Fig. 3 LED displays
Festo — CPX-E-EP — 2020-01a
1 LED displays
2 Rotary and DIL switches
3 Terminal strip for operating voltage supply U
[XD]
4 Terminal strip interlock
5 Network connection [XF2]
6 Linking element
7 Network connection [XF1]
1 Network-specific LED displays:
– Module status [MS] (green, red, orange)
– Network status [NS] (green, red, orange)
– Connection/data traffic [XF1]/[XF2] (green)
2 System-specific LED displays:
– Operating voltage supply U
– Load voltage supply U
– System error [SF] (rot)
– Force mode [M] (yellow)
EL/SEN
[PS] (green)
EL/SEN
[PL] (green)
OUT
9