Table of Contents
Advertisement
Software
Now, the main screen will become available.
The top portion of the main screen shows position information for the selected
controller. The position information can be shown in user defined units or micro-
steps by clicking on the button next to the position text box. Also, in the top
portion, the means to select a Controller (with up/down arrows) is provided.
Users can provide custom identification names for their controllers.
Note that user can select one Controller at any given time to communicate to; also,
the "Stop Motion" and "Motor ON" buttons correspond to the selected Controller.
Figure 12
Main screen
NOTE
Position
text box
37
Advertisement
Table of Contents
