Main - Newport CONEX-PP Series Gui Manual

CONEX-PP
EDH0350En1031 – 12/18
3.2

Main

The Main tab displays the main controls in the Controller GUI like a virtual front panel.
It is updated each time the polling interval timer expires.
"Initialization and Configuration"
In the "Initialization and Configuration" area, the first button changes the controller
status to "Enabled" or "Disabled" To see the different controller states, refer to the
controller state diagram in section 1.3. The second button "Save Pos." memorizes the
current position in the combo box. As soon as a new position is memorized, this is
displayed in the trace.
"Current Position"
In the "Current Position" area, the current position is displayed in a text box and
visualized in a slider. The slider limits are defined with the ends of run. An LED icon
shows the current controller state. When the mouse hovers over the icon, the controller
state is displayed in an information balloon.
"Incremental Motion / PR-Move Relative"
In the "Incremental Motion / PR-Move Relative" area, two increment values can be
defined. For each defined increment, a relative move is performed in either the negative
or positive direction.
10
Controller GUI Manual