Newport NewStep NSA12 User Manual page 57

Command Set
PH
USAGE
SYNTAX
PARAMETERS
Description
Range
Units
Defaults
DESCRIPTION
RETURNS
REL.
COMMANDS
EXAMPLE
get hardware status
IMM MIP
♦ ♦
xxPH?
xx [ int ] - Controller number
xx - 0 to 255
xx - None
xx
missing: None
out of range: None
This command will return the value of the I/O ports of the
processor in the Controller. The are 3 bytes reported for 3 ports B,
D, and E represented in a decimal format.
NOTE: The retuned value are 3 bytes represented in decimal
format. Once converted to a binary representation the below Bit
Map table can be used determine the state of each I/O line.
3 bytes for the values of the I/O ports.
none
| Returns the value of the I/O ports (3
14PH?
bytes) of controller 14
57