Newport NewStep NSA12 User Manual page 54

54 Command Set
OR
USAGE
SYNTAX
PARAMETERS
Description
Range
Units
Defaults
DESCRIPTION
RETURNS
REL.
COMMANDS
EXAMPLE
search for home
IMM MIP
♦
xxOR
xx [ int ] - Controller number
xx - 0 to 255
xx - None
xx
missing: none
out of range: none
This command will start the process of homing the actuator to its
negative hard limit. Once the actuator is homed, the position is set
to zero.
This command will return 1 if the actuator has been Homed and 0
if it has not been Homed since the last power up.
ST - Stop Motion
35OR | Home the actuator on Controller 35
35OR? | Return 1 or 0 if the actuator has been
Homed or not