Table of Contents
Advertisement
DESCRIPTION (LOCATION)
storage compartment)
M6 panel nut (body panels)
M6 x 20 Torx screw (body panels)
Plastic washer (body panels)
M8 x 35 hexagonal flange screw (front
fender)
Sleeve (front fender)
M6 X 20 hexagonal flange screw (AAPTS
sensor)
M6 X 20 Torx screw (rear fender)
Plastic washer (rear fender)
M6 elastic flange nut (rear fender)
M6 panel nut (mudguards)
M6 x 20 Torx screw (mudguards)
Battery installation kit (2 bolts and 2 nuts)
Vehicle Removal
WARNING
SE5 models are automatically set in neutral
position when engine is stopped. Always ap-
ply parking brake before working on vehicle.
WARNING
No one should be standing in front or at the
back of the vehicle while straps are being cut.
Parking brake pedal brakes only the rear
NOTE:
wheel. Press it down to operate. The parking
brake pedal is behind the operator's left footpeg.
1. Remove straps retaining front vehicle to crate
skid.
PREDELIVERY
QTY
4
2
4
4
4
8
rbl2008-003-201_a
1. Front straps
8
2. Remove straps on the side of vehicle.
1
1
1
3
4
4
4
4
4
rbl2008-003-202_b
1
1. Side straps
NOTICE
Front wheels have to stay straight to
avoid contact between bottom of fender and
skid wheels guide.
3. Assisted by another person, move vehicle rear-
ward out of the crate base.
NOTICE
Always move vehicle rearward out of
the crate base.
rbl2010-002-021_a
TYPICAL (RT MODEL SHOWN)
2011-1
UNCRATING
5 / 32
- Quick Links:
- Battery
- Engine Oil
- Specifications
Hide quick links:
Advertisement
Table of Contents
