Lights - BRP Can-Am Spyder RS 2011 Series Predelivery Bulletin

ADJUSTMENTS

Lights

Headlight Aiming Adjustment
North American Models
Position the vehicle in front of a test surface as
shown.
Have a person of at least 91 kg (200 lb) taking
place on the driver's seat.
rmr2011-030-002_a
A. 91 kg (200 lb)
90°
rmo2008-027-103_a
Trace 2 lines parallel to the ground on the test sur-
face as follows:
LINES ON THE TEST SURFACE
Line A 700 mm (27-1/2 in) above ground
Line B 610 mm (24 in) above ground
Have a person of approximately the same weight
as the driver taking place on the vehicle.
Select low beam.
Beam aiming is correct when the focus point of
headlight reflection is between marks.
1
rmo2008-027-101_b
HEADLIGHT REFLECTION ON TEST SURFACE
1. Focus point
A. 700 mm (27-1/2 in) above ground
B. 610 mm (24 in) above ground
22 / 32
Turn adjustment screws to adjust beam height.
Adjust both headlights evenly.
rmr2008-027-102_a
ADJUSTMENT SCREWS
European Models
Position the vehicle in front of a test surface as
shown.
Have a person of at least 91 kg (200 lb) taking
place on the driver's seat.
rmr2011-030-002_a
A. 91 kg (200 lb)
90°
rmo2008-027-103_a
Trace 4 lines parallel to the ground on the test sur-
face as follows:
A
LINES ON THE TEST SURFACE
Line A
B
Line B
Line C
Line D
2011-1
828 mm (32-19/32 in) above
ground
738 mm (29-1/16 in) above ground
464 mm (18-9/32 in) above ground
374 mm (14-23/32 in) above
ground
PREDELIVERY