Important Notice - BRP Can-Am Spyder RS 2011 Series Predelivery Bulletin

IMPORTANT NOTICE

This bulletin must be used in conjunction with the check list enclosed in the bag with the
GUIDE
. Make sure that Spyder roadster
To obtain warranty coverage, predelivery procedures must be performed by an authorized BRP
Can-Am roadster dealer/distributor. Apply all necessary torques as indicated.
The information and components/system descriptions contained in this document are correct at
NOTE:
the time of publication. BRP however, maintains a policy of continuous improvement of its products with-
out imposing upon itself any obligation to install them on products previously manufactured.
Due to late changes, there might be some differences between the manufactured product and the de-
scriptions and/or specifications in this document. BRP reserves the right at any time to discontinue or
change specifications, designs, features, models or equipment without incurring obligation.
The illustrations in this document show the typical construction of the different assemblies and may not
reproduce the full detail or exact shape of the parts. However, they represent parts that have the same
or similar function.
The content of this bulletin is designed as a guideline only. All mechanics performing predelivery
procedures should have attended the current model-year service training.
Further information or inquiries should be directed to your service representative and specific
SHOP MANUAL
sections.
Make sure the customer receives the
SAFETY DVD
and .
Torque wrench tightening specifications must be strictly adhered to. Where specified, install new
locking devices (e.g. lock tabs, elastic stop nuts). If the efficiency of a locking device is impaired,
it must be renewed.
PREDELIVERY
PRE DELIVERY CHECK LIST
WARNING
OPERATOR'S GUIDE
,
WARNING
2011-1
IMPORTANT NOTICE
is completed and signed.
PREDELIVERY CHECK LIST
OPERATOR'S
signed copy
3 / 32