BRP Can-Am Spyder RS 2011 Series Predelivery Bulletin page 30

SPECIFICATIONS
ELECTRICAL SYSTEM (cont'd)
Camshaft position sensor (CAPS)
Engine control module (ECM)
Fuel pump
O² heater
Purge valve
Starter solenoid
D.E.S.S.
License plate light
Position light
Tail lights
Fuses under service
Service connector
cover
Ignition coil
Fuel injectors
Clock
Hazard warning lights
Turn signal lights
Fan
Multifunction gauge cluster
Fog lights (optional)
Blipper (SE5 model)
TCM valves (SE5 model)
Rectifier
Main fuse
Fuses under seat
Dynamic Power Steering (DPS) motor
VSS pump
Headlights
VSS valves
FUEL SYSTEM
Fuel delivery
Fuel pump
Idle speed
Type
Fuel
Octane no.
Fuel tank capacity
DRIVE SYSTEM
Final drive type
Final drive ratio
STEERING
Type
30 / 32
MODEL
Type
Type
Inside North America
Outside North America
Multi-point Electronic Fuel Injection (EFI) with dual 57 mm throttle body
Electrical module in fuel tank
1400 ± 100 RPM (not adjustable)
Regular unleaded gasoline
Carbon reinforced drive belt
Dynamic Power Steering (DPS)
2011-1
SPYDER RS
10 A
10 A
15 A
10 A
15 A
5 A
10 A
20 A
60 A
40 A
40 A
40 A
30 A
25 A
87 (R+M)/2 or higher
92 RON or higher
25 L (6.6 U.S. gal.)
28/79
PREDELIVERY