BRP Can-Am Spyder RS 2011 Series Predelivery Bulletin page 24

ADJUSTMENTS
NOTICE During data transfer, make sure that:
– Voltage (12V) remains stable before starting
update. Charge the battery or use a power
pack to have enough power.
– Although screen ''freezes'' for a while, re-
main on the B.U.D.S. because update still
continues
– Never disconnect any cable while updating
ECM.
MANDATORY TOOLS
A personal computer (laptop or desktop)
MPI-2 INTERFACE CARD
(P/N 529 036 018)
MPI-2 DIAGNOSTIC CABLE
(P/N 710 000 851)
OPTIONAL TOOL
Extension cable
available at electronic retail outlets.
Do not exceed 7.5 m (25 ft)
B.U.D.S. is not used to program the hard
NOTE:
keys (included keys are ready to use).
Use B.U.D.S. to
– Enter Customer's Name
– Reset Trip Hours and Trip Distances
– Reset Last Service
– Set Speedometer Units
– Set Cluster Language
– Check fault codes (if any).
Connecting PC to Vehicle
1. Remove service cover from vehicle.
2. Connect the PC to vehicle. Refer to the latest
CAN-AM ROADSTER B.U.D.S. SOFT-
edition of
WARE AND COMMUNICATION TOOLS
proper connecting procedure.
3. Ensure that the status bar shows the proper
protocol and proper ECU number. Refer to the
following table.
MODEL PROTOCOL
KW2000 500K
SM5
KW2000 500K
SE5
4. Press READ DATA button from the tool bar to
initiate communication with the vehicle.
24 / 32
Entering Customer's Name
NOTE:
tion display will show the name of the customer;
for example: "HI JOHN SMITH". If the cus-
tomer's name is not programmed, only "HI" will
be visible when turning the vehicle ON.
1. Click on the VEHICLE tab to open the vehicle
vbl2006-007-001
2. Type the name of the customer.
for the vbl2006-007-002
3. Click on WRITE DATA to save the information
NOTE:
B.U.D.S. automatically updates the Delivery Date
on the screen.
ECU NUMBER
4
Resetting Trip Hours and Trip Distances
1. Ensure that the VEHICLE tab is selected.
5
2. Click on the RESET TRIP buttons to reset the
2011-1
When starting the vehicle, the multifunc-
information page.
in the vehicle ECM.
After you are finished typing the name,
information.
PREDELIVERY