Horn Connection; Hood Latch Release Cable; Diagnostic Link Cable (Dlc); Mudguards - BRP Can-Am Spyder RS 2011 Series Predelivery Bulletin

PARTS TO BE INSTALLED
rbl2011-002-007_a
1. Cable retaining clips

Horn Connection

1. Connect horn connectors.
2. Route cable through the retaining guide clips.
rbl2011-002-008_a
1. Cable retaining clips
CE Models
If necessary, remove horn from vehicle to ease
connector installation.
rbl2009-001-003_a
HORN RETAINING BOLT LOCATION

Hood Latch Release Cable

1. Attach hood latch release cable into bracket.
2. Squeeze bracket legs to prevent cable from
coming out using pliers.
10 / 32
rbl2008-003-210
3. Verify if the front storage compartment cover
opens and closes correctly.
4. Adjust cable if necessary.
NOTICE
If the key does not turn easily, do not
force it. Pull it out and reinsert.

Diagnostic Link Cable (DLC)

1. Insert diagnostic link cable (DLC) into its hous-
ing on the front section of vehicle.
rbl2008-003-209
DLC CABLE INSERTION

Mudguards

1. From inside mudguards, check for proper loca-
tion (LH or RH side).
2011-1 PREDELIVERY