BRP Can-Am Spyder RS 2011 Series Predelivery Bulletin page 29

ELECTRICAL SYSTEM
Magneto generator output
Ignition system type
Ignition timing
Spark plug
Engine RPM limiter setting
Battery
Headlight
Tail light/brake light
Turn signal lights
Position lights
License plate light
Main relays control
ECM control
Pillion rider switch (PRS)
Vehicle control module (VCM)
Steering angle sensor (SAS)
Yaw rate sensor (YRS)
Fuses under service
Clutch valve
cover
Horn
Service connector
Accessories
Dynamic Power Steering control (DPS)
Transmission control Module (TCM) (SE5 model)
PREDELIVERY
MODEL
Quantity
Make and type
Gap
Forward
Type
Voltage
Nominal rating
Recommended charging rate
Front
Rear
Electronic ignition with dual output coil
NGK DCPR9E (apply heat-sink paste P12
(P/N 420 897 186) on spark plug thread)
0.7 mm - 0.8 mm (.028 in - .031 in)
Maintenance free
CE Models: 4 x 60W
2011-1
SPECIFICATIONS
SPYDER RS
500 W
Not adjustable
2
10 000 RPM
12 volts
21 A•h
2 A
2 x 55 W
2 x 5/21 W
21 W
21 W
2 x 5 W
10 W
10 A
10 A
2 x 3 A
5 A
29 / 32