BRP Can-Am Ryker 900 ACE (Rally Edition) 2019 Operator's Manual
  1. Manuals
  2. Brands
  3. BRP Manuals
  4. Motorcycle
  5. Can-Am Ryker 900 ACE (Rally Edition) 2019
  6. Operator's manual

BRP Can-Am Ryker 900 ACE (Rally Edition) 2019 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

RYKER 600 ACE
RYKER 900 ACE
RYKER 900 ACE (Rally Edition)
Learn how this vehicle is different.
Read this operator's guide and watch the safety video on:
https://can-am.brp.com/spyder/owners/safety/safety-information.html
Complete a training course (if available), pratice and become proficient with the controls.
Consult local laws - license requirements vary by location.
Keep this guide in the front storage compartment.
2 1 9
0 0 2
2019
RYKER
OPERATOR'S
Includes Safety, Vehicle
and Maintenance
0 6 8
TM
GUIDE
Information
Original Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Can-Am Ryker 900 ACE (Rally Edition) 2019 and is the answer not in the manual?

Questions and answers

Dennis B Allen
May 11, 2025

what is a vss fault

0
1 comments:
Mr. Anderson
May 20, 2025

A VSS (Vehicle Stability System) fault in a 2019 BRP Ryker 900 ACE (Rally Edition) refers to a problem with the system that helps maintain control and reduce the risk of rollover or loss of traction. The VSS includes components like ABS (Anti-lock Braking System) and EBD (Electronic Brake Distribution). A fault can occur if:

- Tire pressure or tread condition is poor.
- Non-approved tires are used.
- The system is not recalibrated when carrying a passenger (e.g., footpegs not lowered).
- The vehicle is driven in conditions like snow, ice, or water where traction is low.

A VSS fault may reduce the effectiveness of these safety systems, increasing the risk of losing control.

This answer is automatically generated

0

Subscribe to Our Youtube Channel

Related Manuals for BRP Can-Am Ryker 900 ACE (Rally Edition) 2019

Summary of Contents for BRP Can-Am Ryker 900 ACE (Rally Edition) 2019

  • Page 1 RYKER 900 ACE (Rally Edition) Learn how this vehicle is different. Read this operator‘s guide and watch the safety video on: https://can-am.brp.com/spyder/owners/safety/safety-information.html Complete a training course (if available), pratice and become proficient with the controls. Consult local laws - license requirements vary by location.
  • Page 2 Can-Am ® Rally™ Rotax ® Ryker™ XPS™ 219002068 2019 Ryker Series en AP ®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. ©2018 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.

  • Page 3: Foreword

    Denne boken kan finnes tilgjengelig på ditt eget språk. Kontakt din Norsk forhandler eller gå til: www.operatorsguides.brp.com Este manual pode estar disponível em seu idioma. Fale com sua Português concessionária ou visite o site: www.operatorsguides.brp.com . У а В а а Р...

  • Page 4: Know Before You Go

    BRP reserves the right at any time to dis- The safety alert symbol indicates continue or change specifications, de- a potential injury hazard.

  • Page 5: Refer To Other Sources Of Information

    BRP wishes to thank the Motorcycle Safety Foundation (MSF) for giving In addition to reading this Operator's permission to BRP to use their mate- Guide, you should read the Safety rial related to street motorcycle safety Card , all on-product safety labels and found in this Operator's Guide.

  • Page 6: Table Of Contents

    TABLE OF CONTENTS FOREWORD ................1 Know Before you Go .
  • Page 7 TABLE OF CONTENTS BASIC PROCEDURES (cont’d) Operating During Break-In............36 Fueling ................37 Adjusting Suspension..
  • Page 8 TABLE OF CONTENTS CARRYING A PASSENGER OR CARGO (cont’d) Carrying a Passenger ............69 Where to Store Cargo..
  • Page 9 SPECIFICATIONS ..............141 WARRANTY BRP LIMITED WARRANTY — CANADA AND USA: 2019 Can-Am ®...
  • Page 10 SERIES ................157 BRP LIMITED WARRANTY FOR THE EUROPEAN ECONOMIC AREA, THE...

  • Page 11: General Precautions

    Do not make unauthorized modifica- Avoid Gasoline Fires and tions, or use attachments or acces- Other Hazards sories that are not approved by BRP. Since these changes have not been Gasoline is extremely flammable and tested by BRP, they may increase the highly explosive.
  • Page 12 GENERAL PRECAUTIONS See your authorized Can-Am On-Road dealer for available BRP accessories for your vehicle. ______________...

  • Page 13: Vehicle Information

    VEHICLE INFORMATION _______________...

  • Page 14: Primary Controls

    PRIMARY CONTROLS It is important to know the location and operation of all controls, and to develop and practice smooth and coordinated use of them. WARNING The handlebar, the driver's footpegs and the brake pedal can be easily adjusted to meet each driver needs. It is important that all controls must be fully accessible and easily usable by the person driving the vehicle and this at all times.

  • Page 15: Handlebar

    PRIMARY CONTROLS 1) Handlebar The VSS can never accelerate the vehi- cle. All it can do is to open the throttle Grip the handlebar with both hands. slightly to decrease the amount of en- Steer the handlebar in the direction gine braking on slippery surfaces.

  • Page 16: Shift Lever

    PRIMARY CONTROLS NOTICE Never pull the park lever Turn the key clockwise to lock the park to stop the vehicle. The vehicle must position lever. be stopped prior to engaging the park lever. When the lever is pointed towards the ground, the P position is disengaged.
  • Page 17 PRIMARY CONTROLS NOTICE Never move the shift lever from forward to reverse or re- verse to forward if the vehicle is not fully stopped Forward Normal driving position. This position allows the vehicle to move forward and accelerate through a continuous range of gear ratio.

  • Page 18: Secondary Controls

    SECONDARY CONTROLS 219001998-007 1. RF D.E.S.S. Post 2. Engine start button 3. Engine stop switch 4. Headlights switch 5. Turn signal button 6. Horn button 7. Hazard warning flasher button (Australia and Russia) 1) Radio Frequency Digitally Encoded Security System (RF D.E.S.S.) RF D.E.S.S.

  • Page 19: Engine Start Button

    SECONDARY CONTROLS 219001998-011 219001998-009 To start the engine, toggle the engine stop switch on the RUN position. Each key contains an electronic cir- cuit including a specifically pre- pro- To stop the engine, set the engine stop grammed chip that is read via radio switch to the STOP position.

  • Page 20: Turn Signal Button

    SECONDARY CONTROLS This switch is used to select either the headlights low or high beams Toggle this switch to select the high beams or the low beams. 219001998-016 L = Left turn signal R = Right turn signal 6) Horn Button The horn button is located at the bot- 219001998-014 tom of the left side multifunction...
  • Page 21 SECONDARY CONTROLS Press the button to activate or deacti- vate the hazard warning flashers. 219001998-508 The hazard warning flashers may be activated any time even if the engine is not running. The flashers will drain the battery if they are use for an extended time.

  • Page 22: 4.5" Digital Display

    4.5" DIGITAL DISPLAY Multifunction Display 219001998-081 WARNING Reading or tempering with the multifunction gauge can distract you from the operation of the vehicle, particularly from constantly scanning the environment. Always pay attention to road conditions, ensure your envi- ronment is clear and free from obstacles. Furthermore, when riding, only glance at the multifunction gauge briefly to maintain awareness of road conditions.
  • Page 23 4.5" DIGITAL DISPLAY NOTE: Use this information as a ref- This display indicates the gear position erence only. Due to the fuel tank con- of the gearbox: figuration, the fuel level indicator will – F (forward) indicate a full tank during a long period –...

  • Page 24: Warning Lamps And Indicators

    4.5" DIGITAL DISPLAY When a mode is selected, a message LIGHTS DESCRIPTION is displayed in the lower display. At the GREEN - Left or right turn same time one or more icons will turn signal is turned on, on to confirm your choice. When in NORMAL mode, no informa- Hazard Warning Flasher (if tion is displayed.

  • Page 25: Settings

    4.5" DIGITAL DISPLAY LIGHTS DESCRIPTION ICONS RED - If illuminate while Indicates that the the engine running Traction Control system or while driving, this is partially deactivated. indicates a malfunction. The system allows to have Stop the vehicle as soon all engine power, but with as it is safe to do so reduced driving stability.
  • Page 26 4.5" DIGITAL DISPLAY Menu Buttons To enter in the SETTINGS menu, hold the LOWER button 2-3 seconds. Upper Button NOTE: If no selection is done within 10 The following informations may be dis- seconds, the cluster go out of the SET- played by pressing the UPPER button: TINGS menu –...

  • Page 27: Equipment

    EQUIPMENT Control Components WARNING Adjustment Be sure that the locking lever is well positioned. It should be WARNING equal with the handlebar retaining clamps. The handlebar, the driver's foot- pegs and the brake pedal can be easily adjusted to meet each driver needs.
  • Page 28 3. Lower the footpeg in its position for After the adjustment of the footpegs the driving. and the brake pedal, BRP recommends that the driver seats on the vehicle in Right Side Footpeg and Brake Pedal driving position to determine if the po-...

  • Page 29: Passenger's Seat

    However, you can change this by adding a BRP passenger's seat kit. The BRP passenger's seat kit was de- signed to transport one passenger se- curely and it includes some safety fea- tures required for a safe ride.

  • Page 30: Lights

    EQUIPMENT Lights Australian Models Canadian and USA Models 219001998-511 FRONT OF VEHICLE 1. Headlight - low beam 2. Headlight - high beam 3. Turn signal lights/Hazard warning lights 219001998-090 4. Position lights FRONT OF VEHICLE 1. Headlight - high and low beams 2.
  • Page 31 EQUIPMENT Japanese Models Russian Models 219001998-513 FRONT OF VEHICLE 1. Headlight - low beam 219001998-509 2. Headlight - high beam FRONT OF VEHICLE 3. Turn signal lights/position lights 1. Headlight - low beam 2. Headlight - high beam 3. Turn signal lights/position lights/Hazard warning lights 219001998-512 REAR OF VEHICLE...

  • Page 32: Mirrors

    EQUIPMENT All Other Countries 219001998-029 Repositioning the Mirror Support It may happen that the support be- comes loose and lower during the use of the vehicle. Do the following to reposition and secure the support 219001998-509 correctly. FRONT OF VEHICLE 1.

  • Page 33: Glove Box

    EQUIPMENT 90° 219001998-031 219001998-120 1. Double USB connector 5. Hold the support and tighten the screw. Service Covers TIGHTENING TORQUE Front Service Cover Mirror support 5 N•m ± 0.5 N•m screw (44 lbf•in ± 4 lbf•in) 6. Adjust the mirrors. Glove Box This model comes equipped with a glove box to carry small personal items...
  • Page 34 EQUIPMENT 219001998-033 1. Locking tab 219001998-104 1. Rear tabs of the front service cover 2. Hold the tabs and slide the cover for- 2. LH vehicle support ward. 3. Clip the front of the service cover 3. Remove service cover from vehicle 4.
  • Page 35 EQUIPMENT Removing the Left Service Cover 1. Release both clips, located under- neath the left service cover, that retain it in place. 219001998-039 2. Tilt the service cover. 219001998-036 2. Remove the cover from the vehicle. 219001998-040 Closing the Right Service Cover Close the cover and lock it using the quarter-turn screw.

  • Page 36: Basic Procedures

    BASIC PROCEDURES Starting and Stopping the Engine Starting the Engine IMPORTANT: At start-up, engine RPM will slightly increase by itself before running its normal rotation. WARNING Exhaust gas contains poisonous 219001998-012 carbon monoxide that can rapidly 1. RUN position accumulate in an enclosed or 2.

  • Page 37: Starting In A Slope

    BASIC PROCEDURES If the park position lever IMPORTANT: WARNING is not released before operating Always engage the park position the vehicle, the engine power lever. The vehicle can roll if the will be limited in order to prevent park position lever is not locked. transmission damages.

  • Page 38: Pushing The Vehicle

    BASIC PROCEDURES Pushing the Vehicle Driving in Reverse Check that the area behind you is clear and continue to look backwards while CAUTION Avoid pushing the you operate in reverse. Keep your vehicle on a slope. If you must push speed low and do not back up for long the vehicle on a slope, take extra distances.

  • Page 39: Fueling

    BASIC PROCEDURES Alcohol fuel blending varies by country WARNING and region. This engine was designed New brakes and tires do not op- to operate using the recommended fu- erate at their maximum efficiency els. However, be aware of the follow- until their break-in is completed.
  • Page 40 BASIC PROCEDURES Refueling Procedure 7. Wipe up any spilled fuel. If fuel spills on you, wash with soap and water and change your clothes. WARNING Gasoline is extremely flammable Refueling Procedure With a Portable and highly explosive. Follow the Fuel Container refueling procedure to reduce the risk of fire or explosion.

  • Page 41: Adjusting Suspension

    BASIC PROCEDURES 8. Fully push the fuel filler door for- wards to close it. Adjusting Suspension Suspension adjustment and loading can have an effect on your vehicle han- dling and comfort. Choice of suspension adjustments vary with driver's weight, personal preference, riding speed and field con- 219001998-044 dition.
  • Page 42 BASIC PROCEDURES R R R R y y y y k k k k e e e e r r r r 9 9 9 9 0 0 0 0 0 0 0 0 R R R R a a a a l l l l l l l l y y y y E E E E d d d d i i i i t t t t i i i i o o o o n n n n ADJUSTMENT WEIGHT RING DISTANCE...
  • Page 43 BASIC PROCEDURES KNOB POSITION* WEIGHT SMOOTH ROUGH ROAD ROAD Driver alone (Factory setting) With a passenger * ± 1 click for personal preference 219001998-521 _______________...
  • Page 44 BASIC PROCEDURES This page is intentionally blank ______________...

  • Page 45: Safe Operating Instructions

    SAFE OPERATING INSTRUCTIONS ______ ______ SAFE OPERATING INSTRUCTIONS...

  • Page 46: What's Different From Other Vehicles

    WHAT'S DIFFERENT FROM OTHER VEHICLES Driving Modes This section will help you to under- stand some distinctive and operating features of this vehicle ECO Mode The ECO (fuel economy mode) setting Stability reduces fuel consumption by limit- ing throttle response and maximum The “Y”...

  • Page 47: Brake Pedal

    WHAT'S DIFFERENT FROM OTHER VEHICLES Steering This mode can only be activated when the driver is alone on the vehicle (no passenger) and if no VSS fault is active. Direct Steering To take a turn, always steer the handle- WARNING bar in the direction of the turn.

  • Page 48: Driver's License And Local Laws

    WHAT'S DIFFERENT FROM OTHER VEHICLES This vehicle may back in reverse like a car. However, there are some impor- tant differences: – If necessary, have the passenger dismount if your visibility is limited. – Remember that the front is wider than the rear.

  • Page 49: Driving Aid Technologies

    DRIVING AID TECHNOLOGIES Vehicle Stability System poor traction, if you do not maintain recommended tire pressure or if tire (VSS) tread condition is degraded. This vehicle is equipped with a Vehicle If your tires lose traction with the road Stability System (VSS). surface you may lose control of the ve- This system helps to keeping the con- hicle, even with VSS.
  • Page 50 Replacing your tires with ones Glove box not approved by BRP can cause the 2 kg (4.4 lb) compartment VSS to be less effective. Use only BRP recommended tires,...

  • Page 51: Understanding Risk On The Road

    Read this Operator's Guide, beyond your control. SAFETY VIDEO watch the located at: Here are some of the factors that affect https://can- your risk: am.brp.com/spyder/own- ers/safety/safety-information.html Type of Vehicle and if available, take a training course. Become proficient with...

  • Page 52: Rider Condition

    UNDERSTANDING RISK ON THE ROAD Rider Condition Road and Weather Conditions A driver needs to be alert, sober, and physically ready to ride. Never use this Roads with heavy traffic, poor visibility vehicle with drugs or alcohol. Riding or poor traction surfaces increase your when intoxicated, tired or otherwise risk.

  • Page 53: Riding Gear

    RIDING GEAR Riding this vehicle requires the same Even the best helmet is no guarantee protective gear as motorcycling. Even against injury, but statistics indicate though the vehicle is more stable at that helmet use significantly reduces low speeds than a motorcycle, you can the risk of brain injury.
  • Page 54 RIDING GEAR Gloves Leather is a good choice because it is durable and wind-resistant and pro- Full-fingered gloves protect hands vides protection against injury. Other from the wind, sun, heat, cold and abrasive-resistant protective gear flying objects. Gloves that fit snugly made of synthetic fabrics are good will improve grip on the handlebar and choices, too.
  • Page 55 RIDING GEAR idea to carry rain gear. A dry rider will be much more comfortable and alert than a rider who is wet and cold. One or two-piece styles are available, and those designed specifically for motorcycling are best. High-visibil- ity orange or yellow colors are good choices.

  • Page 56: Required Riding Skills And Practice Exercises

    REQUIRED RIDING SKILLS AND PRACTICE EXERCISES Before riding this vehicle on the road, Keep this basic parking lot diagram in you need to develop riding skills and mind when setting up the exercises. strategies for managing the risks on 3 m (10 ft) wide parking lot spaces are the road.

  • Page 57: Preparing To Ride

    REQUIRED RIDING SKILLS AND PRACTICE EXERCISES Practice Exercises Even in a closed lot, be aware of poten- tial traffic. Check to the front, sides and rear before doing an exercise. 1) Revving the Engine and Using the Also, watch out for children and ani- Engine Stop Switch mals.
  • Page 58 REQUIRED RIDING SKILLS AND PRACTICE EXERCISES – With the brake pedal depressed, 3) Engine Stop while in Motion push on the shift lever to ensure the Purpose forward position is selected. – Become familiar with using the en- – Release the brake. gine stop switch when in motion so –...
  • Page 59 REQUIRED RIDING SKILLS AND PRACTICE EXERCISES 4) Basic Turns Purpose – Get comfortable turning in a con- trolled manner. Directions This exercise is similar to what you did before, except that now instead of stopping for each turn, you will make the turn at low speed.
  • Page 60 REQUIRED RIDING SKILLS AND PRACTICE EXERCISES 5) Quick Stops Purpose – Become familiar with the vehicle braking ability. – Learn to apply brakes with maxi- mum force. Directions This exercise is similar to what you did before, except you’ll be applying the brake more firmly, working up to brak- ing as hard as possible.
  • Page 61 REQUIRED RIDING SKILLS AND PRACTICE EXERCISES rmo2008-005-050_a 1. Start rmo2008-001-046_k 1. Start 12 m (40 ft) Weave Tips for Additional Practice Once you’re comfortable, try doing – You gradually increase 12 m (40 ft) weaves between every speed comfort- other cone/every fourth parking space. able 16 km/h - 19 km/h (10 MPH - 12 MPH) for the weaves,...
  • Page 62 REQUIRED RIDING SKILLS AND PRACTICE EXERCISES – Steer around the line of cones. 8) Operating in Reverse – Exit through the second set of dou- Purpose ble cones. – Become familiar with the vehicle – Repeat the exercise multiple times, handling and turning radius in re- swerving in both directions.

  • Page 63: Developing Advanced Riding Skills

    REQUIRED RIDING SKILLS AND PRACTICE EXERCISES Developing Advanced Riding Skills Once you have mastered basic rid- ing skills, you can begin developing more advanced skills. First, learn the STREET STRATEGIES covered in the next section. Then you can take the ve- hicle on the road in relatively low-risk situations.

  • Page 64: Street Strategies

    STREET STRATEGIES This section provides some strategies road surfaces, down hills, or when car- to reduce your risk on the road. Many rying more weight, and visibility may of these strategies are similar to those be limited in fog, in curves or at night. used for motorcycles.

  • Page 65: Being Visible

    STREET STRATEGIES When braking, be particularly aware of turns. Make sure turn signals are off vehicles behind you that may not be after you have completed your ma- able to stop as quickly than you. neuver; leaving them on may confuse other motorists.

  • Page 66: Lane Position

    STREET STRATEGIES Time of Day and Weather be able to see their mirrors. When you are being followed by a large vehicle, In dim light, such as at night, at dawn passing vehicles may not be able to or dusk, or in poor weather such as rain see you easily if you are not in the left or fog, you may be harder to see.
  • Page 67 STREET STRATEGIES you more visible and discourage other Turns motorists from trying to drive around Remember to slow, look, and steer you. Watch for vehicles approaching through turns. from behind. Flash your brake lights as – Slow: Reduce speed as needed be- they approach.

  • Page 68: Road Conditions And Hazards

    STREET STRATEGIES Curves Do not use tinted or colored visors or lenses at night, and be particularly Because the vehicle is narrower than a careful that your visor does not have car, you can move from side to side scratches or smudges. in the lane in curves to straighten your path of travel.
  • Page 69 STREET STRATEGIES Gravel, Dirt and Sand NOTE: The pressure difference be- tween the left and right side tire should On gravel, dirt, or sand-covered roads, not exceed 3.4 kPa (.5 PSI). use extra caution and reduce your speed, particularly for curves. These Immediately replace any tire that surfaces do not provide as much trac- shows the maximum tread wear indi-...

  • Page 70: On-Road Emergencies

    You can swerve – If you are involved in an accident, and brake at the same time if neces- BRP strongly recommends that sary. you have your vehicle transported If you encounter a large animal in the...

  • Page 71: Carrying A Passenger Or Cargo

    CARRYING A PASSENGER OR CARGO Weight Limits Operating with Extra Weight Do not exceed the weight limits for rid- ers and cargo. Carrying a passenger or heavy cargo affects the way the vehicle handles R R R R y y y y k k k k e e e e r r r r 6 6 6 6 0 0 0 0 0 0 0 0 a a a a n n n n d d d d R R R R y y y y k k k k e e e e r r r r 9 9 9 9 0 0 0 0 0 0 0 0 because of the greater weight, and be- cause the weight distribution will be WEIGHT LIMITS...

  • Page 72: Where To Store Cargo

    Do not carry cargo in the back of the operator's helmet. any other location unless the vehicle is equipped with approved BRP acces- Keep the brakes applied until the pas- sories. senger is in riding position.

  • Page 73: Knowledge Self-Test

    9 9 9 9 ..You should leave your low beam 4 4 4 4 ..You should only replace the tires lights on during the day for added with those approved by BRP visibility. obtained from an authorized...
  • Page 74 KNOWLEDGE SELF-TEST 1 1 1 1 3 3 3 3 ..You should never carry flammable 2 2 2 2 0 0 0 0 ..ABS allows you to press the liquids such as gasoline on brake pedal hard without locking the vehicle or in a storage the wheels.

  • Page 75: Answers

    KNOWLEDGE SELF-TEST Answers 1 1 1 1 1 1 1 1 ..F F F F a a a a l l l l s s s s e e e e You can brake and turn at the same 1 1 1 1 .
  • Page 76 KNOWLEDGE SELF-TEST 1 1 1 1 9 9 9 9 ..F F F F a a a a l l l l s s s s e e e e In cars and trucks, the structure of the vehicle provides protection.

  • Page 77: Safety Information On The Vehicle

    SAFETY INFORMATION ON THE VEHICLE This vehicle comes with hang tags and labels containing important safety informa- tion. Any person who rides this vehicle should read and understand this information on the vehicle before riding. The following illustration used in this Operator's Guide is a general representation only.

  • Page 78: Safety Card

    SAFETY INFORMATION ON THE VEHICLE Safety Card California Proposition 65 Warning The safety card is located inside the right side service cover. Use the safety card to review key infor- . Operating, servicing and WARNING mation and when you are teaching new maintaining a passenger Vehicle can expose you to chemicals including engine exhaust, operators and passengers how to ride...

  • Page 79: Safety Labels

    SAFETY INFORMATION ON THE VEHICLE Safety Labels These labels are affixed to the vehicle for the safety of the operator, passenger or bystanders The following labels are on your vehicle, and they should be considered permanent parts of the vehicle. If missing or damaged, they can be replaced free of charge. See an authorized Can-Am On-Road dealer.
  • Page 80 SAFETY INFORMATION ON THE VEHICLE TIRE AND LOADING INFORMATION / RENSEIGNEMENTS SUR LES PNEUS ET LE CHARGEMENT SEATING CAPACITY / FRONT REAR TOTAL NOMBRE DE PLACES AVANT ARRIÈRE The combined weight of occupants and cargo should never exceed kg or Le poids total des occupants et du chargement ne doit jamais dépasser kg ou SIZE/...
  • Page 81 SAFETY INFORMATION ON THE VEHICLE Set Engine Stop Switch OFF WARNING – Always set the engine stop switch to the OFF position be- fore adjust footpegs and brake pedal. 219001998-049 TYPICAL 1. Label located inside the right side service cover Coolant Hot - Do Not Open EN-704907708_DEC rmo2008-003-003...
  • Page 82 TO REDUCE THE RISK OF LOOSING CONTROL THAT CAN RESULT IN A CRASH NEVER carry a passenger without properly installing a complete BRP passenger kit that ensures the activation of the passenger mode. NEVER exceed 10 kg (22 lb) of cargo.
  • Page 83 SAFETY INFORMATION ON THE VEHICLE Glove Box Load DO NOT OVERLOAD 2 kg (4.4 lb) LOAD LIMIT 7057 EN-704907057A_DEC 219001998-056 INSIDE GLOVE BOX ______ ______ SAFE OPERATING INSTRUCTIONS...

  • Page 84: Reporting Safety Defects

    REPORTING SAFETY DEFECTS Your safety is very important to Bombardier Recreational Products Inc. (BRP). If you have any concerns you should immediately contact BRP customer service. In the USA, if you believe that your vehicle has a defect which could cause a...
  • Page 85 REPORTING SAFETY DEFECTS This page is intentionally blank ______ ______ SAFE OPERATING INSTRUCTIONS...
  • Page 86 REPORTING SAFETY DEFECTS _____ ______ SAFE OPERATING INSTRUCTIONS...

  • Page 87: Pre-Ride Inspection

    PRE-RIDE INSPECTION _______________...

  • Page 88: Pre-Ride Checklist

    Look under the vehicle for any leaks. LOCKING CLIP Check if all locking clips are properly installed. If not, DO NOT USE OF THE CENTER THE VEHICLE and have it transport to an authorized BRP dealer. LOCK WHEEL WHEEL Look for damages.

  • Page 89: Start The Vehicle And Check The Following

    PRE-RIDE CHECKLIST Start the Vehicle and Check the Following: ITEM PROCEDURE MULTIFUNCTION Check the indicators, the messages and the fuel level GAUGE Check operation of headlights, taillights, brake lights, turn signals LIGHTS and, if equipped, the hazard warning lights. HORN Check operation.
  • Page 90 PRE-RIDE CHECKLIST This page is intentionally blank ______________...
  • Page 91 MAINTENANCE _______________...

  • Page 92: Maintenance Schedule

    For emission-related warranty claims, BRP is limiting the diagnosis and repair of emission-related parts to the authorized Can-Am On-Road dealers. For more in-...

  • Page 93: Maintenance Schedule

    MAINTENANCE SCHEDULE Riding in a group in these conditions would increase even more the filters mainte- nance. Maintenance Schedule EVERY YEAR OR EVERY 10 000 KM (6,000 MI) (WHICHEVER COMES FIRST) PRE-RIDE INSPECTION Perform all items indicated in the Check fault codes Replace engine oil and oil filter Check engine coolant level Remove front fascia and clear all debris from radiator air duct...
  • Page 94 MAINTENANCE SCHEDULE EVERY TWO YEAR OR EVERY 20 000 KM (12,000 MI) (WHICHEVER COMES FIRST) Replace gearbox oil Replace final drive oil The following must be performed every two year (irrespective of the covered distance): Replace brake fluid The following must be performed every 20 000 km (12,000 mi) (irrespective of the number of years): Replace spark plugs Replace engine air filter and clean the housing...

  • Page 95: First Inspection

    FIRST INSPECTION We recommend that after the first 5 000 km (3,000 mi) of operation, your vehicle be inspected by an authorized Can-Am On-Road dealer, repair shop, or person of your own choosing. The first maintenance is very important and must not be ne- glected.

  • Page 96: Maintenance Procedures

    The tread-wear indicators will appear signed for this vehicle. Use only the across the treads that have been worn BRP recommended radial tires, which down to the minimum tread depth. can be ordered only from an authorized When at least one tread-wear indicator Can-Am On-Road dealer.

  • Page 97: Wheel

    As a vehicle manufacturer, BRP keeps a record of the Tire Iden- WARNING tification Number (T.I.N.) associated with the Vehicle Identification Number...
  • Page 98 MAINTENANCE PROCEDURES The installation is the reverse of the re- moval procedure. However, pay atten- tion to the following. Align the three dowel pins of the rim with the brake disk holes. NOTICE All contact surfaces of the wheel, wheel hub, brake disc and the thread in the wheel hub must be free of abrasion, sand, dust or chips.
  • Page 99 MAINTENANCE PROCEDURES NOTICE Never untighten the nut Rear Wheel to align the RED locking clip hole. Removing the Rear Wheel Tighten the nut to the nominal value, then tighten further to align the hole. 1. Place the vehicle on a level surface. 2.
  • Page 100 MAINTENANCE PROCEDURES Installing the Rear Wheel NOTICE The installation instruc- tion and tightening torque values must be strictly adhered to. Failure to do so can lead to rim damage. The installation is the reverse of the re- moval procedure. However, pay atten- tion to the following.

  • Page 101: Engine Oil

    5 bars. Rotax ® engines were developed and validated using the XPS™ oil. BRP recommends the use of its XPS engine oil or an equivalent at all time. RTXM-3MY19-003-300 2. Open the RH side service cover while engine is idling.
  • Page 102 MAINTENANCE PROCEDURES NOTICE NOTICE Perform the engine An engine oil level above oil level verification within 10 the MAX mark can lead to severe en- seconds after engine stop. En- gine damage. gine oil is discharging quickly Oil Level Below MIN Mark from oil tank into engine after engine stop which may result 1.
  • Page 103 MAINTENANCE PROCEDURES Changing the Engine Oil and Oil Filter CAUTION The engine oil can be very hot. Wait until engine oil is warm. NOTICE Engine oil and oil filter must be replaced at the same time. 1. Bring engine to its normal operat- RTXM-2MY19-003-005_a ing temperature (90°C (194°F) at oil 600 ACE ENGINE...
  • Page 104 MAINTENANCE PROCEDURES 18. Tighten oil filter cover to recom- mended specification. TIGHTENING TORQUE Oil filter cover 9 N•m ± 1 N•m screws (80 lbf•in ± 9 lbf•in) 19. Wipe off any oil spillage on engine. 20. Install NEW sealing washers on oil drain plugs.

  • Page 105: Engine Air Filter

    MAINTENANCE PROCEDURES NOTICE Inspect air intake silencer APPROXIMATE ENGINE OIL and remove any dust or debris tak- CAPACITY (WITH FILTER) ing care not to blow or move any- 2.6 L thing inside the clean side of the 600 ACE (2.75 qt (U.S. liq.)) engine air inlet (passed air filter).

  • Page 106: Cvt Drive Belt

    MAINTENANCE PROCEDURES NOTICE Remove any dust or de- bris that may have moved or shifted inside the clean side of the air intake silencer (passed air filter). Clean by pulling on the dust and not pushing it inside. Replace air filter as necessary accord- ing to recommended maintenance schedule and particular use (especially in dusty environments).

  • Page 107: Final Drive

    MAINTENANCE PROCEDURES 4. If required, add coolant until it is vis- XPS™ RECOMMENDED COOLANT ible in the reservoir slightly above Extended life pre-mixed coolant the MIN level mark. Use a funnel to avoid spillage. If THE RECOMMENDED XPS Do not overfill. COOLANT IS NOT AVAILABLE 5.
  • Page 108 MAINTENANCE PROCEDURES 3.2 Using a long 8 mm Allen key remove the fill plug. 219001998-102 5. Remove the fill plug. 219001998-101 4. Check oil level. The oil should be level with the bottom of the oil level hole. NOTICE Operating the final drive with an improper oil level may se- verely damage it.

  • Page 109: Gearbox

    MAINTENANCE PROCEDURES Verifying the Gearbox Oil Level TIGHTENING TORQUE 1. Place the vehicle on a level surface. 16 N•m ± 3 N•m Fill plug 2. Stop the engine and move the park (142 lbf•in ± 27 lbf•in) position lever in the locking position. 11.
  • Page 110 MAINTENANCE PROCEDURES Replacing the Gearbox Oil 1. Start engine and operate vehicle to warm-up the gearbox oil. NOTE: Running engine at idle is not sufficient, vehicle gearbox must be op- erated. 2. Position vehicle on a level surface. 3. From underneath of the vehicle, clean magnetic drain plug area.

  • Page 111: Brakes

    MAINTENANCE PROCEDURES rbg2019-002-100 rbg2019-002-101 GEARBOX OIL LEVEL PLUG LOCATION GEARBOX OIL FILLER PLUG LOCATION 1. Oil level plug 1. Oil filler plug 2. LH engine support 2. LH engine support 3. CVT drive belt housing 3. Shift lever 7. Allow oil to completely flow out of 11.
  • Page 112 MAINTENANCE PROCEDURES Check the brake fluid level as follows: 1. Park the vehicle on a firm, level sur- face. 2. Slide the RH footpeg in order to be able to see the level marks on the rear of the master cylinder reservoir. DRIVER'S FOOTPEGS Refer to AND BRAKE PEDAL...

  • Page 113: Battery

    MAINTENANCE PROCEDURES The battery may need to be charged if WARNING the vehicle has not been ridden for at The brake pedal requires an ad- least one month. justment each time the RH footpeg is moved. WARNING Do not use conventional lead-acid To keep brakes in good condition, type batteries.

  • Page 114: Exhaust System

    MAINTENANCE PROCEDURES 5. Start the battery charger. Charging Make sure the vehicle is level and po- time will depend on the charging sitioned perpendicularly with the test rate. surface. When the battery is charged: 1. First disconnect the BLACK (-) cable. 2.
  • Page 115 MAINTENANCE PROCEDURES LINES ON THE TEST SURFACE (ABOVE THE GROUND) Line A 486 mm (19.134 in) Line B 449 mm (17.677 in) Ryker Line C 517 mm (20.354 in) 219001998-093 Line D 466 mm (18.346 in) TYPICAL - HEADLIGHT REFLECTION ON TEST SURFACE Line A 481 mm (18.937 in)
  • Page 116 MAINTENANCE PROCEDURES 1.3 Pull the front bottom corner to unlatch the retaining tab. 219001998-094 TYPICAL - HEADLIGHT REFLECTION ON TEST SURFACE Line C Line D Headlights Aiming Adjustment The headlight aiming adjustment must be performed without weight on the vehicle. 219001998-156 Canada and USA 1.4 Remove the side fairing.
  • Page 117 MAINTENANCE PROCEDURES All Other Countries H H H H i i i i g g g g h h h h B B B B e e e e a a a a m m m m 1. Remove the side fairing. 1.1 Open the glove box and slide the fuel filler door backward.

  • Page 118: Radiator

    MAINTENANCE PROCEDURES 3. Roll up the end of the front fascia WARNING extensions to release the rear re- Adjust both headlights evenly. taining tabs. 219001998-553 4. Pull the front fascia forward to re- move it from vehicle. 219001998-515 1. Adjuster for the horizontal adjustment (left and right) 2.
  • Page 119 MAINTENANCE PROCEDURES 219001998-106 219001998-108 1. Front fascia lower strip LH SIDE SHOWN 2. Radiator support 1. Upper alignment post 2. Upper frame slot 2. Tilt the top of the front fascia against 5. Release both ends of the front fas- the vehicle.

  • Page 120: Steering System

    MAINTENANCE PROCEDURES 219001998-064 219001998-113 TIGHTENING TORQUE 4.3 Pay attention for a slight play and/or a sound coming from Front fascia 3.5 N•m ± 0.5 N•m the ball of the tie-rod. screws (31 lbf•in ± 4 lbf•in) Steering System 1. Verify if the handlebar adjustment mechanism is well clamp, Adjust clamping strength if required.

  • Page 121: Vehicle Care

    VEHICLE CARE Cleaning the Vehicle NOTICE Do not wax or polish matte surfaces (including matte NOTICE Do not use high-pressure paint finishes). washers (like the ones found in car washes) as they may damage cer- SURFACE RECOMMENDATION tain parts of the vehicle. Apply only non-abrasive Glossy paint To clean the vehicle:...

  • Page 122: Storage And Preseason Preparation

    Apply a slow charge at the keep the vehicle in good condition. recommended charging rate of 2A. BRP recommends you have your au- The removal of the battery is not thorized Can-Am On-Road dealer, re- required.

  • Page 123: Road Side Repairs

    ROAD SIDE REPAIRS ______________...

  • Page 124: Diagnostic Guidelines

    DIAGNOSTIC GUIDELINES NOTICE If the vehicle must be ENGINE DOES TURN OVER (cont’d) transported, do not have it towed — towing can seriously damage the 5. The RF D.E.S.S. key is not read. HOW TRANSPORT- vehicle. Refer to – Properly reinstall the D.E.S.S. key ING THE VEHICLE in this section for –...
  • Page 125 DIAGNOSTIC GUIDELINES ENGINE LACKS ACCELERATION OR ENGINE OVERHEATS (cont’d) POWER (cont’d) 3. Dirty radiators fins. 5. Drive belt worn too thin. – Check and clean radiator fins. – Replace drive belt. — If the drive See CLEANING THE RADIA- belt has lost more than 3 mm (1/8 TOR FINS in the MAINTENANCE in) of its original width, it will af- PROCEDURES section.

  • Page 126: Messages In Multifunction Gauge

    NOTE: A combination of two different warnings can occur. BRP recommends having the vehicle transported when in LIMP HOME. If you op- erate the vehicle in LIMP HOME, avoid abrupt maneuvers and immediately go to the nearest authorized Can-Am On-Road dealer to have your vehicle serviced be- fore riding again.
  • Page 127 MESSAGES IN MULTIFUNCTION GAUGE INDICATOR LAMPS (MALFUNCTIONS) INDICATOR DIGITAL CAUSE WHAT TO DO LAMP(S) WARNING - Have the vehicle transported to EBD FAULT the nearest authorized Can-Am malfunction On-Road dealer. - Check for brake fluid leaks. Low brake BRAKE - Check brake fluid level and fluid level or FAILURE MAINTENANCE...

  • Page 128: What To Do In The Following Circumstances

    WHAT TO DO IN THE FOLLOWING CIRCUMSTANCES Lost RF D.E.S.S. Keys WARNING The RF D.E.S.S key is required to start Connect the jumper cables as the vehicle. specified in the jump start proce- dure. If the key is lost during a ride, the en- Batteries can emit explosive gas gine will continue without cut or mis- that can ignite if jumper cables are...
  • Page 129 WHAT TO DO IN THE FOLLOWING CIRCUMSTANCES 8. Start your vehicle in the usual way; if the engine does not start, wait a few minutes before repeating the at- tempt in order to protect the starter motor and the booster battery. NOTE: If it still does not start, there might be a problem with the starting system.

  • Page 130: How Replacing A Fuse

    HOW REPLACING A FUSE If any electrical accessories stop working on the vehicle, check for blown fuses and replace if necessary. If an electrical failure still occurs, have the vehicle serviced by an authorized Can-Am On-Road dealer. Fuse Locations Fuse Box Items Description The fuse box is located in front of the vehicle, beside the battery.

  • Page 131: Replacing A Fuse

    HOW REPLACING A FUSE Replacing a Fuse 1. Turn the engine OFF. 2. Pull the fuse out. 3. Check whether the filament is melted. rmo2008-001-060_a 1. Good fuse 2. Blown fuse 3. Melted filament 4. Replace the fuse with one with the same rating.

  • Page 132: How Changing A Bulb

    HOW CHANGING A BULB The following lights are built with 1.2 Remove and keep the plastic LEDs (light emitting diode) and this rivets retaining the side fairing. technology proved to be reliable. In the unlikely event they do not work, have them checked by an authorized Can-Am On-Road dealer.

  • Page 133: Hi Beam Headlight Bulbs (Outside North America)

    HOW CHANGING A BULB 219001998-078 219001998-500 TYPICAL 5. Remove the defective bulb. 1.2 Remove and keep the plastic 6. Install the new bulb. Align bulb tabs rivets retaining the side fairing. with housing recesses. NOTICE Never touch glass portion of a halogen bulb with bare fingers, it shortens its operating life.

  • Page 134: Low Beam Headlight Projectors (Outside North America)

    HOW CHANGING A BULB Low Beam Headlight 3. Remove the headlight bulb cover. Projectors (Outside North America) The bulb in the low beam projectors cannot be replaced. In the unlikely event they do not work, have them checked by an authorized Can-Am On-Road dealer.

  • Page 135: How Transporting The Vehicle

    HOW TRANSPORTING THE VEHICLE If your vehicle needs to be transported, it should be carried on a flatbed trailer of the proper size and capacity. CAUTION If you need to push the vehicle, do it from the right-hand side to be able to reach the brake pedal.

  • Page 136: To Load The Vehicle Using A Winch

    HOW TRANSPORTING THE VEHICLE To Load the Vehicle Using 6. Engage the park position lever. a Winch 7. Detach the winch and remove straps from lower suspension arms. 1. Make sure the transmission lever is in Forward position WARNING Never use the winch to secure the vehicle.

  • Page 137: Technical Information

    TECHNICAL INFORMATION ______________...

  • Page 138: Vehicle Identification

    VEHICLE IDENTIFICATION The main components of your vehicle (engine and frame) are identified by different serial numbers. It may some- times become necessary to locate these numbers for warranty purposes or to trace your vehicle in the event of loss. These numbers are required by the dealer to complete warranty claims properly.

  • Page 139: Vehicle Compliance Labels

    VEHICLE COMPLIANCE LABELS EPA Compliance Label (North American Models) This label is located inside the glove box. VEHICLE EMISSION CONTROL INFORMATION VEHICLE EMISSION CONTROL INFORMATION BOMBARDIER RECREATIONAL PRODUCTS INC. BOMBARDIER RECREATIONAL PRODUCTS INC. THIS VEHICLE CONFORMS TO U.S. EPA REGULATIONS THIS VEHICLE CONFORMS TO U.S.

  • Page 140: Compliance Labels (Australian Models)

    (Australian Models) This label is affixed on the right lower rear tube. APPROVAL No: xxxxx CATEGORY LEM2 BRP AUSTRALIA PTY LTD BRP CAN AM XXXXXX xx/xx XXXXXXXXXXXXXXXXX THIS VEHICLE WAS MANUFACTURED TO COMPLY WITH THE MOTOR VEHICULE STANDARD ACT 1989...

  • Page 141: Noise Emission Control System Regulation

    NOISE EMISSION CONTROL SYSTEM REGULATION Tampering with Noise Control System Is Prohibited! U.S. Federal law and Canadian provincial laws may prohibit the following acts or the causing there of: 1. The removal or rendering inoperative by any person other than for purposes of maintenance, repair or replacement of any device or element of design incorpo- rated into any new vehicle for the purpose of noise control prior to its sale or de- livery to the ultimate purchaser or while it is in use or...

  • Page 142: Radio Frequency Digitally Encoded Security System (Rf D.e.s.s. Key)

    RADIO FREQUENCY DIGITALLY ENCODED SECURITY SYSTEM (RF D.E.S.S. KEY) This device complies with FCC Part 15 and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

  • Page 143: Specifications

    SPECIFICATIONS Because of our ongoing commitment to product quality and innovation, BRP reserves the right, at any time, to make changes in design and specifications and/or to make additions to, or improvements in its products without imposing any obligation upon itself to install them on its previously manufactured products.
  • Page 144 SPECIFICATIONS LUBRICATION SYSTEM Type Dry sump Replaceable cartridge Oil filter oil filter Ryker 600 2.6 L (2.75 qt (U.S. liq.)) Engine oil tank capacity (engine oil and filter replacement) Ryker 900 3.2 L (3.38 qt (U.S. liq.)) RECOMMENDED Refer to ENGINE OIL Engine oil MAINTENANCE...
  • Page 145 SPECIFICATIONS ELECTRICAL SYSTEM Magneto output 400 watts @ 7000 RPM Type NGK CR8EB or equivalent Spark plug 0.7 mm to 0.8 mm (.028 in to .031 in) YTX14L, Maintenance Type free SLA Battery Voltage 12 volts Nominal rating 12 A•h CA/US H4, 12V 55/60W Headlight...
  • Page 146 SPECIFICATIONS STEERING Type Pitman arm Adjustable steering Steering wheel Turning radius 4 435 mm (174.61 in) FRONT SUSPENSION Double suspension arm Suspension type with stabilizer bar Ryker 600 137 mm (5.39 in) Ryker 900 Suspension travel Ryker 900 Rally 162 mm (6.38 in) Edition Ryker 600 Oil type...
  • Page 147 SPECIFICATIONS REAR SUSPENSION Suspension type Single swinging arm Ryker 600 150 mm (5.91 in) Ryker 900 Suspension travel Ryker 900 Rally 175 mm (6.89 in) Edition Ryker 600 HPG shocks Ryker 900 Shock absorber Type Ryker HPG shocks with piggyback 900 Rally reservoir.
  • Page 148 Kenda KR390 145/60R16 Ryker M/C 66T Front Ryker Kenda KR392 145/60R16 900 Rally M/C 66T Edition Type (use only radial tires recommended by BRP) Ryker Kenda KR391 205/45R16 Ryker M/C 77T Rear Ryker Kenda KR393 205/55R15 900 Rally M/C 81T...
  • Page 149 SPECIFICATIONS DIMENSIONS Overall length 2 352 mm (92.6 in) 1 509 mm (59.4 in) Overall width Overall height 1 062 mm (41.8 in) Ryker 600 599 mm (23.6 in) Ryker 900 597 mm (23.5 in) Seat height Ryker 900 Rally 615 mm (24.2 in) Edition Wheelbase...
  • Page 150 SPECIFICATIONS This page is intentionally blank ______________...

  • Page 151: Warranty

    WARRANTY ______________...

  • Page 152: Brp Limited Warranty - Canada And Usa: 2019 Can-Am Ryker™ Series

    Product, other than those contained in this limited warranty, and if made, shall not be enforceable against BRP. BRP reserves the right to modify this limited warranty at any time, being understood that such modification will not alter the warranty conditions applicable to the Product sold while this limited warranty is in effect.
  • Page 153 – Damage caused by failure to provide proper maintenance or storage, as de- OPERATOR'S GUIDE scribed in the – Damage resulting from removal of parts, improper repairs, improper service or improper maintenance, modifications, alterations that are outside of the original specifications of the Product, or damage resulting from repairs done by a person that is not an authorized servicing Dealer.
  • Page 154 BRP will not honor this limited warranty to any private use owner or commercial use owner if the preceding conditions have not been met. Such limitations are necessary in order to allow BRP to preserve both the safety of its products, and also that of its consumers and the general public.
  • Page 155 In the event of a controversy or a dispute in connection with this limited warranty, BRP suggests that you try to resolve the issue at the dealership level. We recom- mend discussing the issue with the authorized Dealer's service manager or owner.
  • Page 156 In no case may BRP deny an emission performance warranty claim on the basis of: 1. Warranty work or predelivery service performed by any facility authorized by BRP to perform such work or service;...
  • Page 157 40 CFR 86 and with the evaporative emission standards of 40 CFR 1051, as applicable to onroad motorcycles. Where a warrantable condition exists, BRP will repair or replace, as it elects, any part or component with a defect in materials or workmanship that would increase the engine’s emissions of any regulated pollutant within the stated warranty...
  • Page 158 The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. As the vehicle's owner, you should also be aware that BRP may deny you warranty coverage if your vehicle or a part has failed due to abuse, neglect, improper main- tenance or unapproved modifications.

  • Page 159: Brp International Limited Warranty : 2019 Can-Am

    BRP. BRP reserves the right to modify this warranty at any time, being understood that such modification will not alter the warranty conditions applicable to the Products sold while this warranty is in effect.
  • Page 160 Product, or damage resulting from use of parts or accessories not manufactured or approved by BRP which in its reasonable judgement are either incompatible with the product or adversely affect its operation, performance or durability or resulting from repairs done by a person that is not an authorized servicing Distributor/Dealer.
  • Page 161 BRP will not honour this limited warranty to any private use owner or commercial use owner if one of the preceding conditions has not been met. Such limitations are necessary in order to allow BRP to preserve both the safety of its products, and also that of its consumers and the general public.
  • Page 162 BRP reserves the right to improve or modify products from time to time without as- suming any obligation to modify all products previously manufactured.

  • Page 163: Brp Limited Warranty For The European Economic Area, The Commonwealth Of The Independent States And Turkey: 2019 Can-Am Ryker™ Series

    BRP. BRP reserves the right to modify this warranty at any time, being understood that such modification will not alter the warranty conditions applicable to the Products sold while this warranty is in effect.
  • Page 164 Product, or damage resulting from use of parts or accessories not manufactured or approved by BRP which in its reasonable judgement are either incompatible with the product or adversely affect its operation, performance or durability or resulting from repairs done by a person that is not an authorized servicing Distributor/Dealer.
  • Page 165 BRP will not honour this limited warranty to any private use owner or commercial use owner if one of the preceding conditions has not been met. Such limitations are necessary in order to allow BRP to preserve both the safety of its products, and also that of its consumers and the general public.
  • Page 166 BRP reserves the right to improve or modify products from time to time without as- suming any obligation to modify all products previously manufactured.
  • Page 167 The seller shall deliver goods that are complying with the contract and shall be re- sponsible for defects existing upon delivery. The seller shall also be responsible for defects resulting from packaging, assembling instructions or the installation when it is its responsibility per the contract or if accomplished under its responsibility. To be compliant with the contract, the good shall: 1.
  • Page 168 This page is intentionally blank ______________...

  • Page 169: Customer Information

    CUSTOMER INFORMATION ______________...

  • Page 170: Privacy Information

    PRIVACY INFORMATION BRP wishes to inform you that your coordinates will be used for safety and war- ranty related purposes. Furthermore, BRP and its affiliates may use its customer list to distribute marketing and promotional information about BRP and related products.

  • Page 171: Contact Us

    CONTACT US Web Site www.brp.com Asia North America 15/F Parale Mitsui Building,8 565 de la Montagne Street Higashida-Cho, Kawasaki-ku Valcourt (Québec) J0E 2L0 Kawasaki 210-0005 Canada Japan Sturtevant, Wisconsin, U.S.A. Room Dubai, level 12, Platinum Tower 10101 Science Drive 233 Tai Cang Road...

  • Page 172: Change Of Address/Ownership

    Notifying BRP, even after the expiration of the limited warranty, is very important as it enables BRP to reach the vehicle owner if necessary, like when safety recalls are initiated. It is the owner’s responsibility to notify BRP.
  • Page 173 CHANGE OF ADDRESS/OWNERSHIP ______________...
  • Page 174 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank ______________...
  • Page 175 CHANGE OF ADDRESS/OWNERSHIP ______________...
  • Page 176 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank ______________...
  • Page 177 CHANGE OF ADDRESS/OWNERSHIP NOTES ______________...
  • Page 178 CHANGE OF ADDRESS/OWNERSHIP NOTES ______________...
  • Page 179 OPERATOR’S GUIDE, RYKER / ENGLISH GUIDE DU CONDUCTEUR, RYKER / ANGLAIS FAIT AU / MADE IN CANADA U/M:P.C. ®™ AND THE BRP LOGO ARE TRADEMARKS OF BOMBARDIER RECREATIONAL PRODUCTS INC. OR ITS AFFILIATES. ©2018 BOMBARDIER RECREATIONAL PRODUCTS INC. ALL RIGHTS RESERVED. PRINTED IN CANADA.

This manual is also suitable for:

Can-am ryker 900 ace 2019Can-am ryker 600 ace 2019Can-am ryker 2019 seriesCan-am ryker 600 aceCan-am ryker 900 aceCan-am ryker 600 ace (rally edition)

Table of Contents

Save PDF