Yamaha OWNER'S MANUAL HTR-6130 Owner's Manual page 9

Place your speakers in the room and connect them to this
unit.
Place your speakers and subwoofer in the
room.
2 Connect speaker cables to each speaker.
Cables are colored or shaped differently, perhaps with
a stripe, groove or ridge. Connect the striped
(grooved, etc.) cable to the "+" (red) terminals of
your speaker. Connect the plain cable to the "-"
(black) terminals.
Connect each speaker cable to the
corresponding speaker terminal on this unit.
@ Make sure that this unit and the subwoofer are
unplugged from the AC wall outlets.
@ Twist the exposed wires of the speaker cables
together to prevent short circuits.
@ Do not let the bare speaker wires touch each other.
@ Do not let the bare speaker wires touch any metal
part of this unit.
Be sure to connect the left channel (L), right channel
(R), "+" (red) and "-" (black) properly.
Front speakers
Loosen
V
@
To the front right
speaker
@
\
To the front left
speaker
Center and surround speakers
_
Insert
4
To the center speaker
To the surround To the surround
right speaker left speaker
Connect the subwoofer cable to the input
jack on the subwoofer and the SUBWOOFER
OUTPUT jack on this unit.
Subwoot'er
- - _ _ AV receiver
Input jack _ SUBWOTOjFaE R
Subwoofer cable
5 En