Yamaha OWNER'S MANUAL HTR-6130 Owner's Manual page 39

• Selecting decoders for 2-channel
sources (surround decode mode)
Signals input from 2-channel sources can also be played
back on multi-channels.
Press @AMP and then press @SUR. DECODE
repeatedly to select a decoder.
You can select from the following decoders depending on
the type of source you are playing and your personal
preference.
Dolby Pro Logic processing for any
:.,.,:.,.,,.,., : ..,.,,.,., .:..,.
{"'!":IU L,Ui.::!.!, i..
sources
F:'L. ].i ] .i {"{o'...' :]. c " Dolby Pro Logic 1Iprocessing for
movie
sources
Dolby Pro Logic [I processing for
r"d "r "r _..._ . ..... : .,.
!"!....!, .!, !'!L.E:'.:..!, i..
music SOI.IFCeS
Dolby Pro Logic [I processing for
r"d "r "r ,". .........
: :_, .:, .:, ._:,_:: :,..
game Sotlrces
• Editing sound fields parameters
You can enjoy good quality sound with the factory default
parameters. Although you do not have to change the initial
settings, you can change some of the parameters to better
suit the input source or your listening room.
1 While listening to a source, press @AMP
and then press @A /_7 to select the desired
parameter.
2 Press @<1 It> to change the parameter
value.
You cannot change parameter values when "MEM.GUARD" in
"OPTION MENU" is set to "ON" (see page 50).
-'l,i,lt|,l[_lOlqlq,_,,_:
"-'4_"-
Initial settings are indicated in bold under each parameter.
For Pop/Rock, Hall, Jazz, Game, TV Sports,
Movie Spacious and Movie Dramatic:
DSP level r,,,:::c, _ _:::_ _:::_
L.'...q L..L.."."L..L..
Function: Adjusts the effect level.
Choices: MIN, MID, MAX
For PRO LOGIC II Music:
Panorama
F' F :! b K)i::;: A1"i!:::!
Function: Sends stereo signals to the surround
speakers as well as the front speakers
for a wraparound effect.
OFF, ON Choices:
Dimension
Function:
Control range:
Center width
Function:
Control range:
[;,
:[ M Ei..i S :[ 0 i..i
Gradually adjusts the sound field
either towards the front or towards the
rear.
-3 (towards the rear) to +3 (towards
the front), initial setting is STD
(standard).
..,.,,.:., : :.:. :.,, ,.:.,: :
Adjusts the center image from all
three front speakers to varying
degrees. A larger value adjusts the
center image towards the front left and
right speakers.
0 (center channel sound is output only
from center speaker) to 7 (center
channel sound is output only from
front left and right speakers), initial
setting is 3.
For Music Enh. 2ch and Music Enh. 5ch
Effect level EF:CL. L.i.,iL.
Function: Adjusts the effect level.
Choices: LOW, HIGH
35
En