Yamaha OWNER'S MANUAL HTR-6130 Owner's Manual page 20

[_iqllll'i"l(l'lll"
• Connecting to the HDMI or COMPONENT VIDEO jacks
You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using
HDMI or COMPONENT VIDEO connections.
Be sure to connect your video components ill the same way you connect your video monitor to this unit. For example, if you connect
your video monitor to this unit using an HDMI or COMPONENT VIDEO connection, connect your video components to this unit using
the HDMI or COMPONENT VIDEO connection.
HDMI connection
Connecting to the COMPONENT VIDEO jacks
Audio signals input at the HDMI jack are not output
from any speaker terminals but output from the
connected video monitor.
To enjoy the sound from speakers connected to this unit,
- make an analog or digital connection besides the
HDMI connection (see page 15).
- mute the volume of the connected video monitor.
Video monitor
Cable TV or
satellite tuner
DVD player
-T
©
Video monitor
DVD player
• Connect the input source components to the HDM[ DVD or
HDM[ DTV/CBL jack to display the video images on the video
monitor connected to the HDM[ OUT jack.
• Audio/video signals output from the connected component
(such as DVD player etc.) are output to the connected video
monitor only when this unit is turned on and set to the input
source (DVD or DTV/CBL).
• Available audio/video signals depend on the specification of the
connected video monitor. Refer to the instruction manual of
each connected component.
©
©
Cable TV or
satellite tuner
T
©
©
DVDrecorder
16
En