Yamaha OWNER'S MANUAL HTR-6130 Owner's Manual page 28

This unit is equipped with 13 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button:
SCENE 1: DVD Viewing
SCENE 2: Disc Listening
SCENE 3: TV Viewing
SCENE 4: Radio Listening
If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.
Select the desired SCENE template
SCENE template library
(Image)
.,©
Assign the
SCENE template
to the SCENE
button
Press @INPUT < It> (or press @AMP and
then @<_ / I:>) to select the desired template.
- _ INPUT ;:_
Front panel
or
Remote control
F'_iiF'_ M='= i _ 'i =:::,i i :i._ii? i,i
3
Press the OSCENE (or @SCENE) button
again to confirm the selection.
The selected SCENE template is assigned to the
button.
Press and hold the desired @SCENE (or
@SCENE) button for 3 seconds.
The indicator on the selected SCENE button on the
front panel starts to flash, and the name of currently
assigned SCENE template appears in the front panel
display.
3 seconds
3 seconds
or Q
Front panel Remote control
or
Front panel Remote control
To cancel the procedure, press @AMP and then @RETURN.
Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you may need to set the input
source of the SCENE template on the remote control. See page 28
for details.
Flashes
i,,. i = i,,. i= • , ,,.
ili_i ii '_ =2:Li '_ i,":LJ
24
En