Yamaha OWNER'S MANUAL HTR-6130 Owner's Manual page 43

You can tune into any desired station simply by selecting
the preset station group and number under which it was
stored.
When performing this operation with the remote control, press
@TUNER to select "TUNER" as the input source.
Press @A/B/C/DIE (or @A/B/C/DIE < / I>)
repeatedly to select the desired preset
station group (A to E).
The preset statkm group letter appears in the front
panel display and changes each time you press the
button.
Press @PRESET/TUNING < It> (or
@PRESET/CH A / V) to select the desired
preset station number (1 to 8).
The preset station group and number appear in the
front panel display along with the station band and
frequency.
ET'i ,: i:'M '2:"? :':::: ML.i-.:.
L....,". :: i i ; :...: i :; ....: i i i i.::..
You can select the desired preset station number (1 to 8) directly
by pressing the numeric buttons (@),
You can exchange the assignments of two preset stations
with each other. The example below describes the
procedure to exchange preset station "El" with "AS".
1 Select preset station "El" using @AIBIClDIE
and @PRESET/TUNING <1 / I>.
See "Selecting preset stations" on this page.
2
Press and hold ®PRESET/TUNING for
more than 3 seconds.
"El" and the MEMORY indicator flash in the front
panel display.
Flashes
ET'i =: i:'M 'D"? :':::: ML.i...:.
Flashes
3
4
Select preset station "A5" using
@AIBIClDIE and @PRESET/TUNING <1/
"AS" and the MEMORY indicator flash in the front
panel display.
See "Selecting preset stations" on this page.
Flashes
i:::i !:::; i',i:::" i"i :::) i :::i .. !:::i i"ib,i'::"
Flashes
Press _PRESET/TUNING again.
"EXCHANGE El-A5" appears in the front panel
display and the assignments of the two preset stations
are exchanged.
39
En