Download Print this page

Yamaha HTR-6150 Service Manual

Av receiver/av amplifier.
Hide thumbs

Advertisement

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING:
IMPORTANT:
I CONTENTS
TO SERVICE PERSONNEL .......................................... 2
FRONT PANELS ........................................................ 3–4
REAR PANELS .......................................................... 5–8
REMOTE CONTROL PANEL ........................................ 9
SPECIFICATIONS .................................................. 10–12
INTERNAL VIEW ......................................................... 13
DISASSEMBLY PROCEDURES ........................... 14–16
UPDATING FIRMWARE ........................................ 17–21
SELF DIAGNOSIS FUNCTION (DIAG) ................. 22–44
1 0 1 0 8 6
AV RECEIVER/AV AMPLIFIER
RX-V563/HTR-6150/
IMPORTANT NOTICE
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
2008
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
DSP-AX563
SERVICE MANUAL
DISPLAY DATA ........................................................... 45
IC DATA ................................................................. 46–59
BLOCK DIAGRAMS .............................................. 61–65
PRINTED CIRCUIT BOARDS................................ 66–79
PIN CONNECTION DIAGRAMS ............................ 80–81
SCHEMATIC DIAGRAMS ...................................... 83–96
REPLACEMENT PARTS LIST ............................ 97–109
REMOTE CONTROL .......................................... 110–112
Advanced setup ......................................................... 113
All rights reserved.
P.O.Box 1, Hamamatsu, Japan
'08.03

Advertisement

   Also See for Yamaha HTR-6150

   Related Manuals for Yamaha HTR-6150

   Summary of Contents for Yamaha HTR-6150

  • Page 1: Service Manual

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.

  • Page 2: To Service Personnel

    RX-V563/HTR-6150/DSP-AX563 I TO SERVICE PERSONNEL 1. Critical Components Information AC LEAKAGE WALL EQUIPMENT TESTER OR Components having special characteristics are marked s and OUTLET UNDER TEST EQUIVALENT must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)

  • Page 10: Specifications

    RX-V563/HTR-6150/DSP-AX563 I SPECIFICATIONS I Audio Section I Video Section Minimum RMS Output Power (Power Amp. Section) Video Signal Type (1 kHz, 0.9 % THD) Gray back FRONT L/R, CENTER, SURROUND L/R, SURROUND U, C, R, K models ............ NTSC BACK L/R T, A, B, G, E, F, L models ..........

  • Page 11

    U, C, T, K, A, B, G, E, F models ........ 0.8 W Mode Sub-mode U, C models E, F, L models by Yamaha in accordance with a license agreement. Maximum Power Consumption (5ch drive, 10 % THD) DVD Viewing Movie STRAIGHT –...

  • Page 12

    RX-V563/HTR-6150/DSP-AX563...

  • Page 13: Internal View

    RX-V563/HTR-6150/DSP-AX563 I INTERNAL VIEW • Top view VIDEO (3) P.C.B. VIDEO (5) P.C.B. (R, L models) MAIN (1) P.C.B. VIDEO (4) P.C.B. Tuner DSP P.C.B. VIDEO (6) P.C.B. OPERATION (8) P.C.B. OPERATION (2) P.C.B. MAIN (2) P.C.B. OPERATION (9) P.C.B.

  • Page 14: Disassembly Procedures

    RX-V563/HTR-6150/DSP-AX563 I DISASSEMBLY PROCEDURES (Remove parts in the order as numbered.) Disconnect the power cable from the AC outlet. 1. Removal of Top Cover 2. Removal of Front Panel Unit a. Remove 5 screws (1), 4 screws (2) and 1 screw (3).

  • Page 15

    RX-V563/HTR-6150/DSP-AX563 3. Removal of DSP P.C.B. 4. Removal of VIDEO (1), (2) and (6) P.C.B.s Note: U, C, F models a. Remove 2 screws (7). (Fig. 3) R, T, K, A, B, G, E, F, L models After replacement of DSP P.C.B. or writing of the b.

  • Page 16

    RX-V563/HTR-6150/DSP-AX563 Rear panel When checking the P.C.B.: Ground lead a. Remove the top cover. (Fig. 1) b. Remove DSP P.C.B.. (Fig. 2) c. Remove 6 screws (A). (Fig. 5) d. Remove 2 screws (B). (Fig. 5) e. Remove 3 screws (C). (Fig. 6) G3401 f.

  • Page 17: Updating Firmware

    After replacement of DSP P.C.B. or writing of the firmware, make sure to activate the self-diagnostic function and change the “M6 Model ID” setting to the same model name as this unit (RX-V563 or HTR-6150). After replacing the following parts, be sure to write the latest firmware.

  • Page 18

    RX-V563/HTR-6150/DSP-AX563 2. While simultaneously pressing the “MAIN ZONE ON/OFF” (RX-V563, HTR-6150) / “STANDBY/ON” (DSP-AX563) and “SPEAKERS A/B/OFF” keys of this unit, connect the power cable of this unit to the AC outlet. (Fig. 2) The FIRMWARE UPDATE mode is activated and “SPDIF Upgrade” is displayed. (Fig. 2) "MAIN ZONE ON/OFF"...

  • Page 19

    11. Remove the firmware CD from the disc tray and close the disc tray. 12. Turn off the power of the DVD/CD player and disconnect the power cable from the AC outlet. 13. Turn off the power by pressing the “MAIN ZONE ON/OFF” (RX-V563, HTR-6150) / “STANDBY/ON” (DSP-AX563) key of this unit.

  • Page 20

    1 to 13 of “Operation Procedures” again. 1. Reconnect the power cable of this unit to the AC outlet. 2. Press the “MAIN ZONE ON/OFF” (RX-V563, HTR-6150) / “STANDBY/ON” (DSP-AX563) key while simultaneously pressing the “STRAIGHT” and “AUDIO SELECT” keys. (Fig. 5) Then the self-diagnostic function is activated.

  • Page 21

    After replacement of DSP P.C.B. or writing of the firmware, make sure to activate the self-diagnostic function and change the “M6 Model ID” setting to the same model name as this unit (RX-V563 or HTR-6150). 1. Connect the power cable of this unit to the AC outlet.

  • Page 22

    RX-V563/HTR-6150/DSP-AX563 I SELF-DIAGNOSTIC FUNCTION This unit has self diagnosis functions that are intended for inspection, measurement and location of faulty point. There are 19 main menu items, each of which has sub-menu items. Listed in the table below are menu items and sub-menu items.

  • Page 23

    Memory initialized). * In order to keep the user memory stored, be sure to select PRESET INHIBITED (Memory initialization inhibited). 2. Turn off the power by pressing the “MAIN ZONE ON/OFF” (RX-V563, HTR-6150) / “STANDBY/ON” (DSP-AX563) key of this unit.

  • Page 24

    RX-V563/HTR-6150/DSP-AX563 When there is no history of protection function: When there is no protection history After a few seconds NO PROTECTION A1.ANLOG BYPAS When there is a history of protection function due to excess current PRI PRT:xxx AD value when the protection function is working Cause: An excessive current flowed through the power amplifier.

  • Page 25

    RX-V563/HTR-6150/DSP-AX563 When there is a history of protection function due to abnormal voltage in the power supply section PRV1 PRT:xxx AD value when the protection function is working Cause: The voltage in the power supply section is abnormal. Supplementary information: The protection function worked due to a defect or overload in the power supply.

  • Page 26

    RX-V563/HTR-6150/DSP-AX563 • Operation procedure of Main menu and Sub-menu There are 19 main menu items, each of having sub-menu items. Main menu selection: Select the main menu using “ ” (forward) and “ ” (reverse) keys of PROGRAM. w w w w w...

  • Page 27

    RX-V563/HTR-6150/DSP-AX563 • Details of Self-Diagnostic Function menu A. BYPASS Using the sub-menu, it is possible to select ANALOG BYPASS output or DSP BYPASS output. ANALOG BYPASS The analog input sound signal is output to FRONT L/R with EFFECT OFF. A1.ANLOG BYPAS...

  • Page 28

    RX-V563/HTR-6150/DSP-AX563 C. SPEAKER SET The analog switch settings for each sub-menu are as shown in the table below. FRONT : SML 0dB SMALL LARGE LARGE SWFR CENTER : NONE LARGE NONE LARGE SWFR LFE/B : FRNT LARGE SMALL SMALL FRONT...

  • Page 29

    RX-V563/HTR-6150/DSP-AX563 D. XCH INPUT The input source [MULTI CHANNEL INPUT] is selected. It is possible to select the 6-ohm/8-ohm by using the sub-menu. 6 ch INPUT 6-ohm D1.6chINPUT 6 Ω INPUT: MULTI CH INPUT SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz...

  • Page 30

    RX-V563/HTR-6150/DSP-AX563 E. MIC CHECK The signals input through the microphone are output of FRONT L/R via A/D and D/A. E1.MIC CHECK F. FL CHECK Use this program to check the FL display section and video control section. When checking the video control section, connect a TV monitor to this unit with a component video cable, S video cable and video pin cable.

  • Page 31

    RX-V563/HTR-6150/DSP-AX563 G. TEST TONE The outputs the noise through the channels specified by the submenu. The noise frequency for LFE (SUBWOOFER) is 35 to 80 Hz. Other than that, the noise frequency is 500 to 2 kHz. TEST ALL G1.TEST ALL Noise is output from all channels.

  • Page 32

    RX-V563/HTR-6150/DSP-AX563 H. XM STATUS (U, C models) The output check of XM radio is executed. (Connect XM radio antenna module to this unit before executing.) 1 kHz, -1 dB / 44.1 kHz H1.1k - 1dB/44 The test tone (1 kHz, -1 dB / 44.1 kHz) is output.

  • Page 33

    RX-V563/HTR-6150/DSP-AX563 iPod This menu is used to test the DOCK connector without the iPod itself. After turning off the power to this unit short between pins No. 14 (TX) and No. 18 (RX), between pins No. 1 (PWR) and No. 17 (ACCPOW), between pins No. 4 (iPDET) and No.

  • Page 34

    RX-V563/HTR-6150/DSP-AX563 Clear Bluetooth pairing information While the Bluetooth DOCK is connected, initialization of the Bluetooth DOCK pairing information is inhibited/reserved. Use “PRESET/TUNING<” and “PRESET TUNING>” keys for operation. Initialization inhibited Initialization reserved I4.BT CLR:INHI I4.BT CLR:RSRV Initialization inhibited Initialization reserved User memory initialization is not executed.

  • Page 35

    RX-V563/HTR-6150/DSP-AX563 K. SIRIUS (U, C models) The SIRIUS antenna module is checked. (Connect SIRIUS antenna module to this unit before executing.) SIRIUS: K1.SIRIUS : xx Connection of the SIRIUS antenna module connection is checked. OK : Normal NG : Abnormal —...

  • Page 36

    RX-V563/HTR-6150/DSP-AX563 L. VIDEO CONVERSION The video circuit is checked by the sub-menu operation. Video INFO. The information of video signal is displayed. L1. V-IN: CONVERSION S-Video The signal passage as shown below is checked. L2.V-CONV S-V S-Video DIGITAL IC11 AD9389...

  • Page 37

    RX-V563/HTR-6150/DSP-AX563 CONVERSION OFF The signal passage as shown below is checked. L4.V-CONV OFF Conversion OFF DIGITAL IC11 AD9389 HDMI Tx DIGITAL DIGITAL IC12 IC21 ADV7441 ADV7172 VIDEO VIDEO VIDEO IC304 DECODER ENCODER LC74782 Bypass S Video S Video Video Video Test pattern The test pattern is output from IC84 (DIGITAL P.C.B.).

  • Page 38

    Model ID for EDID setting (U, C, F models) After replacement of DSP P.C.B or writing of the firmware, make sure to change the “M6 Model ID” setting to the same model name as this unit (RX-V563 or HTR-6150). Press “PRESET/TUNING<” or “PRESET TUNING>” key for selection.

  • Page 39

    RX-V563/HTR-6150/DSP-AX563 N. A/D DATA CHECK This menu is used to display the A/D conversion value of the microprocessor which detects panel keys of the main unit and protection functions in using the sub-menu. When K0/K1 menu is selected, keys become non-operable due to detection of the values of all keys. However, it is possible to advance to the next sub-menu by turning the VOLUME of the main unit.

  • Page 40

    RX-V563/HTR-6150/DSP-AX563 TH/PL THM (Thermo protection detection) The temperature of the heat sink is detected. Normal value: 0 to 136 (Reference voltage: 3.3 V=255) * If THM is out of the normal value range, the protection function works to turn off the power.

  • Page 41

    RX-V563/HTR-6150/DSP-AX563 K0/K1 K0/K1: KEY0/KEY1 (Panel key of main unit) A/D value of the key fails to function properly when the standard value is deviated by ± 4. In this case, check the constant of partial pressure resistor, solder condition, etc. Refer to table.

  • Page 42

    RX-V563/HTR-6150/DSP-AX563 O. PROTECTION The A/D setting value of each protection is displayed. (Reference voltage: 3.3 V=255) PRD (Amplifier DC protection) Low/High O1.PRD: 23/ 70 The minimum and maximum preset value of PRD is displayed. PV1 (Voltage protection 1) Low/High O2.PV1: 68/161 The minimum and maximum preset value of PV1 is displayed.

  • Page 43

    RX-V563/HTR-6150/DSP-AX563 Q. RESERVED R. FACTORY PRESET This menu is used to reserve/inhibit initialization of the user memory (Parameters and set menu contents, etc. of the sound field program). The signals are processed using EFFECT OFF (The L/R signal is output using ANALOG BYPASS).

  • Page 44

    RX-V563/HTR-6150/DSP-AX563 S. ROM VER/SUM The version and checksum are displayed. The signal is processed using EFFECT OFF. The checksum is obtained by adding the data at every 8-bit for each program area and expressing the result as a 4- figure hexadecimal data.

  • Page 45: Display Data

    RX-V563/HTR-6150/DSP-AX563 I DISPLAY DATA G V6001: 17-BT-32GNK (OPERATION P.C.B.) G ANODE CONNECTION 13G~1G PATTERN AREA G PIN CONNECTION Pin No. 68 67 Connection F2 NX Pin No. Connection Note : 1) F1, F2 ..Filament pin 2) NP ..No pin 3) NX ..

  • Page 46

    RX-V563/HTR-6150/DSP-AX563 I IC DATA IC31: LC89057W-VF4AD-E (DSP P.C.B.) Pin No. Function Name Detail of Function Digital audio interface transceiver RXOUT Output pin of input bi-phase selection data Input pin of TTL-compatible digital data Digital data input pin with built-in amplifier that supports coaxial...

  • Page 47

    RX-V563/HTR-6150/DSP-AX563 IC41: AD91089SKBC CPU (DSP P.C.B.) Microprocessor Event controller/ JTAG test Watch dock timer and emulation Core timer Real time clock Voltage regulator UART port IrDA® Memory L1 instruction L1 data management memory memory unit Timer0, Timer1, Timer2 Core/System bus interface...

  • Page 48

    RX-V563/HTR-6150/DSP-AX563 Memory Interface Synchronous memory control Function Function Detail of Function Detail of Function Name Name ADDR19 SRAS Row address strobe ADDR18 SCAS Column address strobe ADDR17 Write enable ADDR16 Address bus for async/Sync access SCKE Clock enable ADDR15 CLKOUT...

  • Page 49

    RX-V563/HTR-6150/DSP-AX563 JTAG port Mode controls Function Function Detail of Function Detail of Function Name Name JTAG clock Reset (This pin is always active dur- RESET JTAG serial data out ing core power-on.) JTAG serial data in Nonmaskable interrypt (This pin JTAG mode select should be pulled LOW when not used.)

  • Page 50

    RX-V563/HTR-6150/DSP-AX563 Supplies Function Function Detail of Function Detail of Function Name Name VDDEXT I/O power supply VDDINT Core power supply External ground VDDRTC Real-time clock power supply...

  • Page 51

    RX-V563/HTR-6150/DSP-AX563 • Microprocessor extended port IC57-IC59: SN74LV574APWR (DSP P.C.B.) Octal edge-triggered D-type flip-flops with 3-state outputs IC57 Pin No. Port Name Function Name Detail of Function /EXPE Extended port enable Data bus 00 Data bus 01 Data bus 02 Data bus 03...

  • Page 52

    RX-V563/HTR-6150/DSP-AX563 IC59 Pin No. Port Name Function Name Detail of Function /EXPE Extended port enable Data bus 00 Data bus 01 Data bus 02 Data bus 03 Data bus 04 Data bus 05 Data bus 06 Data bus 07 DGND...

  • Page 53

    RX-V563/HTR-6150/DSP-AX563 • Microprocessor ADC select port IC81: ADC084S021CIMM (DSP P.C.B.) 4-channel, 200 kSPS, 8-bit A/D converter 8-Bit SCLK SUCCESSIVE APPROXIMATION DOUT ADC084S021 SCLK CONTROL LOGIC DOUT Pin No. Port Name Function Name Detail of Function /ADC_CS CS for microprocessor +3.3S Power supply +3.3V...

  • Page 54

    RX-V563/HTR-6150/DSP-AX563 IC82, IC83: SN74LV4051APWR (DSP P.C.B.) 8-channel analog multiplexers/demultiplexers INPUTS CHANNEL None IC82 Pin No. Port Name Function Name Detail of Function /TUNER_TUNED Tuner tuned detection XM_ANT XM antenna ADC_COM1 SPI bus COM (IC81) DOCK_ID DOCK detection (Normal DOCK or Bluetooth adapter)

  • Page 55

    RX-V563/HTR-6150/DSP-AX563 IC401 : R2A15218FP (MAIN P.C.B.) 8 ch electronic volume with 11 input selector and tone control 49 48 46 45 38 37 34 33 A VCC AVCC MUTE N.C. AVEE A VEE N.C. TREL 0/-6/-12/-18dB ADCL BASSL2 BASSL1 ADCR N.C.

  • Page 56

    RX-V563/HTR-6150/DSP-AX563 Pin No. Function Name Detail of Function SBLC Connects capacitor for reducing click noise of L/R/C/SW/SL/SR/SBL/SBR channel volume SBL OUT Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel AGND Analog ground of internal circuit SBR OUT Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel SBRC...

  • Page 57

    RX-V563/HTR-6150/DSP-AX563 Pin No. Function Name Detail of Function MUTE Outside mute control pin AVEE Negative power supply to internal circuit ADCL Output pin for L/R channel ADC ADCR AGND Analog ground of internal circuit INR1 INL1 INR2 INL2 INR3 INL3...

  • Page 58

    RX-V563/HTR-6150/DSP-AX563 IC603: M66003-0131FP-R (OPERATION P.C.B.) 18 digit 5x7 segment VFD controller/driver Display code CGROM SEG00 (35-bit x 166) (8-bit x 60) Segment SEG25 Code output write SEG26 circuit CGROM SEG34 dot data Serial (35-bit x 16) data write receive Code/...

  • Page 59

    RX-V563/HTR-6150/DSP-AX563 Pin No. Port Name Function Name Detail of Function /RESET Reset Reset input When "L", M66003 is initialized /CEFL Chip select input When "L", communication with the MCU is possible When "H", any instruction from the MCU is neglected...

  • Page 60

    RX-V563/HTR-6150/DSP-AX563 MEMO MEMO...

  • Page 61

    RX-V563/HTR-6150/DSP-AX563 I BLOCK DIAGRAMS AUDIO (DIGITAL) SECTION BLOCK DIAGRAM • See page 83-90 → Data Line Power off during standby mode SCHEMATIC DIAGRAM Control Line PCB DSP I2C Bus HDMI Tx HDMI IN 1 PortA IC11 TMDS HDMI OUT 24bit...

  • Page 62

    RX-V563/HTR-6150/DSP-AX563 DSP CONTROL SECTION BLOCK DIAGRAM AUDIO_SEL (default) 24.576MHz HDMI (I2S) Clock for DTS96/24 128fs SBCK Master Clock SLRCK Optical Out RX OUT Bit Clock Coaxial In Word Clock Optical In1 256fs (512fs for DTS96/24) IC43 • See page 83-90 →...

  • Page 63

    RX-V563/HTR-6150/DSP-AX563 AUDIO (ANALOG) / POWER SUPPLY SECTION BLOCK DIAGRAM HP Relay Control Head Phone YPAO Power Limit Detect To DSP P.C.B. FM/AM FM/AM TUNER Front A (U, C, R, T, K, A, G, E, F, L models) Mute Control 54,55...

  • Page 64

    RX-V563/HTR-6150/DSP-AX563 VIDEO SECTION BLOCK DIAGRAM CVBS & YC INPUT SELECTOR IC41 (4051) SVDET INPUT CPNTD PCB DSP MUTE IC12 IC21 HDMI Rx/ BYPASS VIDEO ENCODER Vconv VIDEO DECODER CMP0 MICROPROCESSOR ADV7172 VIDEO CMP1 V-AUX ADV7441A CBYPASS OSD_CE iPod OSD_CK OSD_DT...

  • Page 65

    RX-V563/HTR-6150/DSP-AX563 CONTROL SECTION BLOCK DIAGRAM Power off during standby mode • See page 83-90 → SCHEMATIC DIAGRAM (Writing port) EEPROM MICROPROCESSOR IC42 IC41 BR25L320F-W DOCK UART SPI0 • See page 95, 96 → VIDEO SCHEMATIC DIAGRAM IC31 IC38 IC39 LC89057W...

  • Page 66

    RX-V563/HTR-6150/DSP-AX563 I PRINTED CIRCUIT BOARDS DSP P.C.B. (Side A) HDMI COAXIAL OPTICAL R, T, K, A, B, G, E, F, L models DVD/CBL MD/CD-R No replacement part available. U, C models DTV/CBL SIRIUS DOCK (Writing port) CB12 CB11 CB13 CB35...

  • Page 67

    RX-V563/HTR-6150/DSP-AX563 DSP P.C.B. (Side B) R, T, K, A, B, G, E, F, L models U, C models U, C models R, T, K, A, B, G, E, F, L models R, T, K, A, B, G, E, F, L models R, T, K, A, B, G, E, F, L models •...

  • Page 68

    RX-V563/HTR-6150/DSP-AX563 OPERATION (1) P.C.B. (Side A) VIDEO (6) (CB366) OPERATION (8) (CB602) U, C, R, T, K, A, G, E, F, L models OPERATION (7) (CB606) RMSCN SCENE4 SCENE3 W6009 W6001 SCENE2 SCENE1 /MICDET SSEL3 SSEL2 SSEL1 /PSW REM1 /BLK...

  • Page 69

    RX-V563/HTR-6150/DSP-AX563 OPERATION (1) P.C.B. (Side B) U, C, R, T, K, A, G, E, F, L models IC601 U, C, R, T, K, A, G, E, F, L models • Semiconductor Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location...

  • Page 70

    RX-V563/HTR-6150/DSP-AX563 OPERATION (2) P.C.B. (Side A) R, T, K, A, B, G, E, F, L models U, C, R, T, K, A, B, G, E, F, L models U, C, R, T, K, A, B, G, E, F, L models...

  • Page 71

    RX-V563/HTR-6150/DSP-AX563 OPERATION (2) P.C.B. (Side B) U, C models • Semiconductor Location Ref no. Location Ref no. Location D7005 D7016 D7006 D7017 D7010 Q7000 D7012 Q7001 D7013 Q7002...

  • Page 72

    RX-V563/HTR-6150/DSP-AX563 OPERATION (3) P.C.B. (Side A) OPERATION (3) P.C.B. (Side B) OPERATION (4) P.C.B. (Side A) OPERATION (4) P.C.B. (Side B) R, T, K, A, B, G, E, F, L models R, T, K, A, B, G, E, F, L models...

  • Page 73

    RX-V563/HTR-6150/DSP-AX563 OPERATION (6) P.C.B. (Side A) OPERATION (6) P.C.B. (Side B) OPERATION (7) P.C.B. (Side A) OPERATION (7) P.C.B. (Side B) R, T, K, A, B, G, E, F, L models R, T, K, A, B, G, E, F, L models...

  • Page 74

    RX-V563/HTR-6150/DSP-AX563 Circuit No. U, C, R, T, K, A, L G, E, F C4037 C4109, 4123, 4126 OPERATION (8) (CB610) Q4012 OPERATION (2) L4001 (CB701) MAIN (1) P.C.B. (Side A) XL401 IC502 IC503 IC501 • Semiconductor Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no.

  • Page 75

    RX-V563/HTR-6150/DSP-AX563 MAIN (1) P.C.B. (Side B) U, C, R, T, K, A, G, E, F, L models G, E, F models IC406 IC405 IC407 IC402 IC404 IC403 U, C, R, T, K, A, G, E, F, L models B model MAIN (2) P.C.B.

  • Page 76

    RX-V563/HTR-6150/DSP-AX563 VIDEO (1) P.C.B. VIDEO (1) P.C.B. (Side A) (Side B) VIDEO (2) (CB325) (CB32) IP_C IP_VE IP_Y IP_VE IP_V IP_VE OSD_CE OSD_CK OSD_DT -12V PRV2 +12V OPERATION (2) (W701) • Semiconductor Location Ref no. Location D3001 D3002 IC301 IC302...

  • Page 77

    RX-V563/HTR-6150/DSP-AX563 VIDEO (2) P.C.B. (Side A) VIDEO (2) P.C.B. (Side B) (CB22) U, C, R, T, K, A, B, G, E, F, L models CB326 • Semiconductor Location Ref no. Location Ref no. Location D3201 D3215 D3202 D3216 D3203 D3217...

  • Page 78

    RX-V563/HTR-6150/DSP-AX563 VIDEO (3) P.C.B. (Side A) VIDEO (3) P.C.B. (Side B) R, L models R, L models U, C, T, K, A, B, G, E, F models ACDET OPERATION (2) (CB700) R, L models CB345 R, L models CB344 AC IN...

  • Page 79

    RX-V563/HTR-6150/DSP-AX563 VIDEO (4) P.C.B. (Side A) VIDEO (5) P.C.B. (Side A) R, L models POWER TRANSFORMER SPEAKERS SURROUND BACK/ SURROUND BI AMP VOLTAGE SELECTOR 230-240V 1-2/5-6 220V 2-3/6-7 110V 3-4/7-8 4-5/8-1 120V VOLTAGE SELECTOR POWER TRANSFORMER VIDEO (6) P.C.B. VIDEO (6) P.C.B.

  • Page 80

    RX-V563/HTR-6150/DSP-AX563 I PIN CONNECTION DIAGRAMS ADC084S021 CIMM NJM2845DL1-18 NJM2867F3-05 NJM4565M PCM1680DBQR PCM1803DBR AD91089ZSKBC AD9389BBSTZ-165 ADV7441ABSTZ-170 SN74AHCT245PWR SN74LVC245APWR 2:GND R2A15218FP R5523N001A-TR-F SN74AHCT574PWR SN74LV14APWR SN74LV574APWR 8D-F SN74LVC08APWR SN74LVC32APW ISP1760BE ADV7172KST BR25L320F-W EEPROM EN29LV160AB-70TCP F2621E-01-TR SN74LV157APWR STK433-130-E STK433-330-E TC74HC4052AF SN74LV4051APWR TC74VHC153FT K4S641632K-UC60000 KIA7805API...

  • Page 81

    RX-V563/HTR-6150/DSP-AX563 Transistors 2SA1037K 2N5401C-AT/P 2N5551C-AT 2SA1708 2SB1274 2SC1815 Y 2SC1740S 2SA1015-Y 2SC2705 2SC3326-A (TE85R, F) DTA143EKA KRA102M-AT/P KRA102S-RTK/P RTQ040P02 2SC2412K KRA104S-RTK 2SC3326-B (TE85R, F) KRC102M-AT DTC114EKA KRC102S-RTK 2SC4081 T106 2SD1938F KRC104S-RTK 1. Drain 2. Drain 3. Gate 1: GND 4. Source...

  • Page 82

    RX-V563/HTR-6150/DSP-AX563 MEMO MEMO...

  • Page 83

    RX-V563/HTR-6150/DSP-AX563 SCHEMATIC DIAGRAMS DSP 1/8 IC12: ADV7441ABSTZ-170 10-bit, integrated, multiformat SDTV/HDTV video decoder, RGB graphic digitizer, and 2:1 multiplexed HDMI/DVI interface VBI DATA PROCESSOR ANCILLARY ANCIKKARY DATA DATA HDMI DECODER FORMATTER DTX/CBL ANALOG INTERFACE DIGITAL PROCESSING BLOCK CLAMP ADC 0...

  • Page 84

    RX-V563/HTR-6150/DSP-AX563 DSP 2/8 to DSP 6/8 to DSP 1/8 to DSP 6/8 to DSP 1/8 Page 95 to VIDEO (1)_CB303 to DSP 6/8 to DSP 6/8 to DSP 5/8 to DSP 5/8 to DSP 5/8 to DSP 1/8 to DSP 5/8...

  • Page 85

    RX-V563/HTR-6150/DSP-AX563 DSP 3/8 DIGITAL OUTPUT DIGITAL INPUT MD/CD-R MD/CD-R DTV/CBL (Writing port) No replacement part available. SIRIUS DOCK CB34 JK31 CB33 CB35 to DSP 5/8 to DSP 4/8 to DSP 8/8 Page 95 XM DT to VIDEO (1)_W3002 to DSP 6/8...

  • Page 86

    RX-V563/HTR-6150/DSP-AX563 DSP 4/8 to DSP 3/8 to DSP 3/8 to DSP 7/8 SBL/SBR DIGITAL IN to DSP 3/8 to DSP 3/8 to DSP 6/8 to DSP 3/8 to DSP 3/8 to DSP 3/8 EEPROM IC43 to DSP 3/8 FL/FR SL/SR...

  • Page 87

    RX-V563/HTR-6150/DSP-AX563 DSP 5/8 IC152 to DSP 7/8 to DSP 4/8 to DSP 4/8 IC152 IC151 to DSP 6/8 / to DSP 7/8 to DSP 6/8 / to DSP 7/8 to DSP 6/8 to DSP 6/8 to DSP 7/8 to DSP 6/8...

  • Page 88

    RX-V563/HTR-6150/DSP-AX563 DSP 6/8 to DSP 3/8 to DSP 7/8 to DSP 3/8 to DSP 1/8 to DSP 3/8 to DSP 2/8 to DSP 8/8 to DSP 5/8 to DSP 8/8 NPGA to DSP 7/8 to DSP 5/8 to DSP 1/8...

  • Page 89

    RX-V563/HTR-6150/DSP-AX563 DSP 7/8 to DSP 5/8 to DSP 5/8 to DSP 5/8 to DSP 4/8 IC72 to DSP 5/8 to DSP 6/8 to DSP 6/8 to DSP 6/8 to DSP 4/8 USB HOST IC71 No replacement part available. POINT B-1 XL701 (Pin 11 of IC71)

  • Page 90

    RX-V563/HTR-6150/DSP-AX563 DSP 8/8 to DSP 5/8 to DSP 4/8 to DSP 6/8 IC81: ADC084S021 CIMM 4-channel, 200 ksps, 8-bit A/D converter to DSP 6/8 8-Bit SUCCESSIVE APPROXIMATION to DSP 4/8 to DSP 3/8 SCLK CONTROL IC81 LOGIC to DSP 6/8...

  • Page 91

    RX-V563/HTR-6150/DSP-AX563 OPERATION 1/2 Page 95 to VIDEO (1)_W3001 CB610 Page 94 to MAIN_W401 OPERATION (8) -30.6 -30.6 -30.7 -30.7 -30.7 -30.7 -30.7 -30.7 -30.7 -30.7 -23.6 -30.7 -30.7 -30.7 -30.7 OPERATION (9) -30.7 -30.7 -27.2 -30.7 -30.7 IC603 -30.7 -30.7 -27.2...

  • Page 92

    RX-V563/HTR-6150/DSP-AX563 OPERATION 2/2 IC701, 703: KIA7805API Voltage regulator INPUT POINT B-2 / +3.3D, B-3 / Q7002 (C) Q11-1 OUTPUT +3.3D +3.3D Q7002 (C) Q7002 (C) COMMON (GND) Power cable ON Power cable ON Power cable OFF IC704: KIA7812API Voltage regulator...

  • Page 93

    RX-V563/HTR-6150/DSP-AX563 MAIN 1/2 43.8 IC502 43.7 CENTER 43.6 IC501: STK433-330-E CENTER 3-channel AF power amplifier, stand-by circuit built-in -12.1 FRONT A Driver Driver Driver MONO IC -12.1 – – – 43.6 FRONT B Bias Circuit W504A W504B -12.1 5 4 6 7...

  • Page 94

    RX-V563/HTR-6150/DSP-AX563 MAIN 2/2 FRONT (6CH) SB (8CH) SURROUND Page 91 Page 85 to OPERATION (8)_CB610 to DSP_CB31 SUBWOOFER CENTER IC401: R2A15218FP 8-channel electronic volume with 11 input selector and tone control 49 48 46 45 38 37 34 33 A VCC 11.8...

  • Page 95

    RX-V563/HTR-6150/DSP-AX563 VIDEO 1/2 Page 92 Page 91 Page 85 to OPERATION (2)_W701 to OPERATION (8)_CB609 to DSP_CB32 IC308 -8.7 -5.0 IC309 IC304 -5.0 Page 84 to DSP_CB21 POINT C-1 XL301 (Pin 3 of IC304) IC305 CB303 -5.0 CB304 Page 96...

  • Page 96

    RX-V563/HTR-6150/DSP-AX563 VIDEO 2/2 Page 95 Page 84 to VIDEO (1)_CB304 to DSP_CB22 VIDEO (4) CB351 12.1 12.1 Page 93 Y-DETECTOR to MAIN_W502 12.1 12.1 12.1 12.1 -11.8 -11.8 IC326 -5.0 SURROUND BACK/ BI AMP Page 93 to MAIN_W503 SURROUND SURROUND L -5.0...

  • Page 97: Replacement Parts List

    RX-V563/HTR-6150/DSP-AX563 I REPLACEMENT PARTS LIST • ELECTRICAL COMPONENT PARTS WARNING G Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. G The chip resistor is not supplied as a replacement part.

  • Page 98

    RX-V563/HTR-6150/DSP-AX563 P.C.B. DSP Ref. No. Part No. Description Markets Ref. No. Part No. Description Markets WN276000 P.C.B. C302 US135100 C.CE.CHP 0.1uF WN276100 P.C.B. C303-314 US062220 C.CE.CHP 220pF 50V B WN276200 P.C.B. C315-316 UR037100 C.EL 10uF WN276300 P.C.B. C319 UR037100 C.EL 10uF WN276400 P.C.B.

  • Page 99

    RX-V563/HTR-6150/DSP-AX563 P.C.B. DSP Ref. No. Part No. Description Markets Ref. No. Part No. Description Markets C501-502 UB446100 C.CE.CHP 1uF D131-132 WJ586300 VARISTOR SDV1608H100C050YPT C503 US635100 C.CE.CHP 0.1uF D135-136 WJ586300 VARISTOR SDV1608H100C050YPT C504-505 US063100 C.CE.CHP 1000pF 50V B D201 VT332900 DIODE...

  • Page 100

    RX-V563/HTR-6150/DSP-AX563 P.C.B. OPERATION Ref. No. Part No. Description Markets Ref. No. Part No. Description Markets WN278000 P.C.B. OPERATION C7005 UR866100 C.EL WN278100 P.C.B. OPERATION RTKAGEFL C7006-7007 US135100 C.CE.CHP 0.1uF WN278200 P.C.B. OPERATION C7008 UR866100 C.EL CB601-602 VB858300 CN.BS.PIN 4P C7009 US135100 C.CE.CHP 0.1uF...

  • Page 101

    RX-V563/HTR-6150/DSP-AX563 P.C.B. OPERATION and P.C.B. MAIN Ref. No. Part No. Description Markets Ref. No. Part No. Description Markets JK603 WJ117400 JACK.MNI OPTIMIZER MIC C4003 US064100 C.CE.CHP 0.01uF 50V B PJ601 WJ117500 JACK.PIN 3P C4005-4006 US061470 C.CE.CHP 47pF 50V B UCRTKAGEFL PJ602 WJ117500 JACK.PIN 3P...

  • Page 102

    RX-V563/HTR-6150/DSP-AX563 P.C.B. MAIN Ref. No. Part No. Description Markets Ref. No. Part No. Description Markets C5012-5013 UR037100 C.EL 10uF s IC501 X8190A00 IC STK433-330-E C5014 WJ603300 C.MYLAR 470pF 50V J s IC502-503 X7427A00 IC STK433-130-E C5015 UR277220 C.EL 22uF PJ401 V7190400 JACK.PIN 6P...

  • Page 103

    RX-V563/HTR-6150/DSP-AX563 P.C.B. MAIN and P.C.B. VIDEO Ref. No. Part No. Description Markets Ref. No. Part No. Description Markets TE502 WK560800 TERM.SP 4P MST-204V1-01 NC UCRTA C3061-3065 US135100 C.CE.CHP 0.1uF TE502 WK560900 TERM.SP 4P MST-204V1-01 WC KBGEFL C3066 US061100 C.CE.CHP 10pF...

  • Page 104

    RX-V563/HTR-6150/DSP-AX563 P.C.B. VIDEO Ref. No. Part No. Description Markets Ref. No. Part No. Description Markets IC304 X7818A00 IC LC74782JM-8A16-TLM TE352 WN045900 TERM.SCR 8P UCRTA IC305 XZ509A00 IC TC74VHCU04FT INVER TE352 WN046300 TERM.SCR 8P KBGEFL IC307 X6742A00 IC LA73050-TLM-E XL301 WN380400 RSNR.CRYS 14.3181MHz AT-49...

  • Page 105

    RX-V563/HTR-6150/DSP-AX563 Chip Resistors Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. 1.0 Ω 3100 3100 10 kΩ 7100 7100 HJ35 HF85 HF45 HF45 1.8 Ω ❊ 3180 11 kΩ 7110...

  • Page 106

    RX-V563/HTR-6150/DSP-AX563 • OVERALL ASS’Y R, L models R, T, K, A, B, G, E, F models 2-22 2-23 2-24 U, C, R, T, K, A, G, E, F, L models (C2) Front Panel Unit (C1) (B2) (B1) U, C, R, T, L models...

  • Page 107

    RX-V563/HTR-6150/DSP-AX563 Ref. No. Part No. Description Remarks Markets Ref. No. Part No. Description Remarks Markets MF124250 FLEXIBLE FLAT CABLE 24P 250mm P=1.25 WB408400 DAMPER 10x30 t=4 2-22 MF131120 FLEXIBLE FLAT CABLE 31P 120mm P=1.25 WB484700 DAMPER SCREW MASK 2-23 MF126100 FLEXIBLE FLAT CABLE 26P 100mm P=1.25...

  • Page 108

    RX-V563/HTR-6150/DSP-AX563 • FRONT PANEL UNIT Ref. No. Part No. Description Remarks Markets U, C, R, T, K, A, G, E, F, L models MF124250 FLEXIBLE FLAT CABLE 24P 250mm P=1.25 WM752400 FRONT PANEL WM751100 FRONT PANEL V563BL WM751200 FRONT PANEL...

  • Page 109

    RX-V563/HTR-6150/DSP-AX563 • AMP UNIT Ref. No. Part No. Description Remarks Markets WN272300 P.C.B. ASS'Y MAIN UCRTA 2-104 WN272400 P.C.B. ASS'Y MAIN WN272500 P.C.B. ASS'Y MAIN 2-104 WN272600 P.C.B. ASS'Y MAIN WN278000 P.C.B. ASS'Y OPERATION WN278100 P.C.B. ASS'Y OPERATION RTKAGEFL WN278200 P.C.B.

  • Page 110

    RX-V563/HTR-6150/DSP-AX563 I REMOTE CONTROL G RAV280 (U, C models), RAV282 (R, T, K, A, B, G, E, F, L models) • SCHEMATIC DIAGRAM • PANELS RAV280 RAV282 (U, C models) (R, T, K, A, B, G, E, F, L models)

  • Page 111

    RX-V563/HTR-6150/DSP-AX563 • IR CODE • KEY LAYOUT [AMP] [USB] RAV282 [XM] RAV280 [SIRIUS] RAV280 [CD] [MD/CD-R] [TUNER] [DVD] [DVD/CBL] [DVR] [V-AUX] [VCR] [PHONO] Label ID1 (default) ID 1 (default) (default) (default) MAIN ZONE2 MAIN ZONE2 POWER_TV – – (TV POWER)

  • Page 112

    RX-V563/HTR-6150/DSP-AX563 • FUNCTION CHART Label [AMP] [USB] RAV282 [XM] RAV280 [SIRIUS] RAV280 [CD] [MD/CD-R] [TUNER] [DVD] [DTV/CBL] [DVR] [V-AUX] [VCR] [PHONO] POWER _ TV (TV POWER) (TV POWER) (TV POWER) (TV POWER) (TV POWER) (TV POWER) (TV POWER) (TV POWER)

  • Page 113

    RX-V563/HTR-6150/DSP-AX563...

  • Page 114

    RX-V563/HTR-6150/ DSP-AX563...

This manual also for:

Dsp-ax563, Rx-v563

Comments to this Manuals

Symbols: 0
Latest comments: