Yamaha OWNER'S MANUAL HTR-6130 Owner's Manual page 55

In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha
and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code
for each input source (see page 53).
• Controlling this unit
Press @AMP to control this unit.
AMP--
*1
• Controlling a TV
Press @ DTV/CBL to control your TV. To control your
TV, set the appropriate remote control code for
@ DTV/CBL (see page 53).
DTV/C B L
*2
ii
iiii iil
_1 These buttons always control this unit.
_2 These buttons control this unit only when @AMP is pressed.
_1 These buttons always control your TV regardless of whether
you press @DTV/CBL
or not.
TV POWER Turns on or off the power.
TV CH +_ Changes the channel number.
Increases or decreases the volume
TV VOL +/
level.
TV INPUT Changes the input source.
TV MUTE Mutes the audio output.
_2 These buttons control your TV only when @DTWCBL is
pressed. For details, see the "Digital TV/Cable TV" column on
page 52.
_%,._
You can control more than one TV by setting the appropriate
remote control code for any input source selector buttons other
than @DTV/CBL In such a case, you can control the buttons
highlighted above (*1 and *2) when you press the input source
selector button.
51
En