System Ip Address Configuration - Panasonic PN28168 Operation Manual

4.5.2.

System IP Address Configuration

On the Basic Switch Configuration Menu, pressing "I" opens the System IP Config-
uration Menu screen, as shown in Fig. 4-9. On this screen, you can set IP-address-
related settings for this Switching Hub.
PN28168 Local Management System
Basic Switch Configuration -> System IP Configuration Menu
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
DHCP Mode:
-------------------------------- <COMMAND> -----------------------------------
Set [I]P Address
Set Subnet [M]ask
Set Default [G]ateway
Set IP P[a]rameter
Set [D]HCP Status
Set DHCP [R]enew
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
MAC Address Displays the MAC address of this Switching Hub. This value is uniquely assigned to
each device and cannot be changed.
IP Address Displays the current IP address. "0.0.0.0" is the factory default setting.
Subnet Mask Displays the current subnet mask. "0.0.0.0" is the factory default setting.
Default Gate- Displays the current IP address of the router, set as a default gateway. "0.0.0.0" is
way the factory default setting.
DHCP Mode Displays the DHCP mode. If enabled, the Switching Hub requests an IP address to
the DHCP server. "Disabled" is the factory default setting.
Enabled
Disabled
DHCP Renew Renews an IP address from the DHCP server.
xx:xx:xx:xx:xx:xx
0.0.0.0
0.0.0.0
0.0.0.0
Disabled
Fig. 4-9 System IP Address Configuration
Requests an IP address to the DHCP server when starting up.
Does not request an IP address to the DHCP server when starting
up.
38