Card Reader X Motorized Exit Device - Assa Abloy Norton 6300 Series Programming Instructions Manual

6300 Series Wiring Diagrams
Input 9: Security Override
Continuous contact closure of this input triggers operator to disable input 2 / Activation 2. This is
typically used for switching off an outside wall plate.
During "ON" hours Access Control will Open signal to Input (9). During "OFF" hours Access Control
will have a Closed signal that will open with valid card read.
Copyright © 2019, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9363-0015-020 Rev 1 11/19
Card Reader x Motorized Exit Device Wiring Diagram
19