5
7
8
Tools required:
• Allen wrench set (inch)
• Small blade screwdriver
• Screwdriver (Phillips size 2 and size 3)
• Tape ruler
• Power drill
• Center punch
• Wire stripper
• #7 drill 1/4-20 tap (metal frame / door
install)
• 3/16" drill (for self-drilling/self-tapping)
• #16 drill (for pull side track install)
• 10" or 12" adjustable wrench
Use screw pack and hardware provided to mount operator.
WARNING: To reduce the risk of injury to person,
use this operator only with Pedestrian Swing doors.
For Indoor Use Only.
Copyright © 2017 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
6310 Pull Side
1
6350 Pull Side Double Egress (RH Shown)
Full Feature Low Energy Operator
Installation and Instruction Manual
4
Item No.
Description
Pull Body Sub-Assembly (6310LAP)
1
Power Supply/Board Sub-Assy (6300CM)
2
3
Cover (6300 COV)
4
Back Plate Board (6300BPB)
5 & 6
End Cap Kit (6300END)
7
Standard Pull Arm Package (6310-1)
8
Double Egress Pull Arm Pkg (6350-1L (LH);6350-1R (RH)
ETL certified; conforms to ANSI/UL standard
325 for automatic closing doors and UL10C
Positive Pressure Fire Test for Door Assemblies.
Certified to ANSI/BHMA A156.19 for Low Energy
Door Operators.
Page 1
6300 Series Pull Side
pour la version francaise voir
www.nortondoorcontrols.com
(up to 180° opening)
6
2
(up to 130° opening)
80-9363-0001-020 Rev 8 11/17
3