Leica R9 Instructions Manual page 117

2.8 Light balance for display of
a Manual exposure control setting (small
1
markings: / EV step each, large mar-
2
kings: 1 EV step each)
b Exposure compensation setting for auto-
matic modes
c Automatic exposure series setting
(bracketing, only possible with
Motor-Drive R8/R9)
d Exposure control for flash metering mode
2.9 Shutter speed (= exposure time)
a Manually set value for
matically controlled value for
display in half steps or
b (high) or
exposure in automatic modes and for
flash exposure
c " " = B setting for long-time
exposures
d = High speed sync flash mode
(alternating with the time value)
e for camera settings that cannot be
made
and , auto-
and
(low) for over- or under-
2.10 Frame counter for
a Displaying the frame number
b Both figures flashing = Multiple exposure.
c Figures flashing in the following sequence:
left / right / both = first / second / third
frame in an automatic exposure series
(bracketing, only possible with
Motor-Drive R8/R9)
d flashing = Film not loaded correctly or
not completely rewound (only when using
Motor-Winder R8/R9 or Motor-Drive R8/R9)
; Note:
The viewfinder LCD is always lit up when the
power is turned on (see "Turning the camera on
/ Activating the electronics / - the exposure
metering system, p. 131). The brightness of this
illumination is automatically adjusted to the
external lighting conditions to give optimum
readability. This ensures that the information can
be read at the greatest external brightness and
prevents over-illumination in low-light conditions.
111