Event Edit (Scene/Lib.) - Yamaha O2R Owner's Manual

1. Use the [AUTOMIX]
button to locate the
AUTOMIX 5/7 page.
AUTOMIX
2. Use the CURSOR buttons
to select an event to
edit.
3. Use the CURSOR buttons
to select the DUPLICATE
icon and press [ENTER] to
duplicate an event.
4. Use the CURSOR buttons
to select the DELETE icon
and press [ENTER] to
delete an event.
Address Capture
1. With timecode running,
press the (CAPTURE)
button.
2. To insert an event at the
captured address, press
the (INSERT) button.
3. Use the (LOCATE) button
to locate events around
the captured address.

Event Edit (Scene/Lib.)

The Event Edit (Scene/Lib.) page, shown below, allows you to duplicate
and delete mix scene and library recall events, and insert new events.
Timecode addresses can be captured on-the-fly, and new events inserted
at the captured points. The Locate function provides a speedy way to
locate events in a complex automix.
Mix scene recall events and library program recall events are listed in the
Time Code, Memory, and Channel columns. Events can be moved by
editing the timecode addresses, and events are resorted automatically. In
the Memory column, event type and memory number can be edited. In
the Channel column, the channel number for EQ, dynamics, effects, and
channel library events can be edited. Mix scene events do not have a
Channel value. Use the CURSOR buttons to move up or down the event
list, and the encoder wheel to edit values.
The selected event can be duplicated or deleted using the DUPLICATE
and DELETE icons. When the Selected CH parameter is checked, only
events corresponding to the selected channel are listed, useful for editing
an automix consisting of many events.
When the SYNC icon is pressed, events occurring around the current
timecode address are displayed. The timecode counter below the SYNC
icon displays the incoming timecode. When the CAPTURE icon below
that is pressed, the current timecode address is captured and displayed in
the window below. Up to eight timecode addresses can be captured, and
they are stored when the 02R is turned off. The parameter next to the
CAPTURE icon is used to select the addresses. When the LOCATE icon is
pressed, events occurring about the captured timecode address are
displayed. When the INSERT icon is pressed, a new scene recall event is
inserted at the captured timecode address. The new event can then be
edited as required.
Automix 155
02R User's Guide