Slot Output Select - Yamaha O2R Owner's Manual

194 Digital I/O, Setup, and Utilities
1. Use the [DIGITAL I/O]
button to locate the
DIGITAL I/O 3/5 page.
DIGITAL
I/O
2. Use the CURSOR buttons
to chose one of the four
SLOT icons, and the
[ENTER] button to select
it.
Slots can also be
selected by pressing
the left or right cursor
button repeatedly.
3. Use the CURSOR buttons
to select a source for
each output.
02R User's Guide

Slot Output Select

The Slot Output Select function allows you to individually select bus outs,
aux sends, channel direct outs, and the left and right channels of the
stereo output for I/O card outputs.
Shown below is the DIGITAL I/O 3/5 page—Slot Output Select.
For each output you can select one source: bus, aux, stereo, or direct.
default all outputs are set to bus.
1 page, while direct outputs 9 to 16 appear on the SLOT 2 page.
When no I/O cards are inserted, or a cascade card is inserted, these pages
are grayed out.
In 24-bit Recording mode, where each slot is reduced to four outputs, the
Slot Output Assign pages appear as follows:
Direct outputs 1 to 8 appear on the SLOT
By