Yamaha O2R Owner's Manual page 116

6 Controls and Connections
02R User's Guide
Display and related controls
C
SCENE MEMORY
FADER STATUS
INPUT
D
AUX
1 2 3 4
5 6 7 8
SELECTED CHANNEL
E
MIC/LINE
TAPE/RTN
OUTPUT
13. SCENE MEMORY indicator
This 2-digit (7-segment) LED shows the currently selected Scene
Memory program. It also contains the Edit Indicator, which will
start flashing when the current mix scene is first adjusted.
14. FADER STATUS indicators
These LED indicators show the status of the faders. When you
select the AUX buttons ([AUX 1] through [AUX 8]), the AUX LED
will illuminate to indicate the faders are used to set the auxiliary
send levels. The currently selected AUX button is also indicated
here.
Normally, the INPUT LED is illuminated.
15. SELECTED CHANNEL indicators
The 2-digit (7-segment) LED shows the currently selected channel
number for the SELECTED CHANNEL controls. The three LEDs
below indicate the status of the selected channel: MIC/LINE,
TAPE/RTN, or OUTPUT.
16. Graphical display
This is the 320 240 pixel, CFL-backlight, graphical display. It
displays the system functions and their parameter values both
graphically and numerically.
17. Stereo output level meters
These stereo meters consist of 21-elements per channel.
18. Contrast control
This control adjusts the contrast of the graphical display.
F
Edit
Indicator
G
CLIP
-2
-4
-6
-12
-15
-24
-35
-48
-60
-72
L STEREO R
CONTRAST
H