Yamaha O2R Owner's Manual page 310

Digital recording console version 2
Hide thumbs Also See for O2R:
Table of Contents

Advertisement

200
Digital I/O, Setup, and Utilities
02R User's Guide
detects an error in the digital input or output, your recorded data may
be compromised. However, some modular digital multitrack recorders
will cause this error while performing synchronization during start-up.
MIDI Warning OFF—With this option checked, the 02R will not report
a warning when it receives a MIDI error.
The following error conditions will not be reported: "Byte Count
Error!", "Check Sum Error!", "Code Mismatch!", "ID Mismatch", and
"MIDI Ch Mismatch".
Initial Data Nominal—When scene memory 0 is recalled, all channel
faders move to the minimum position. With this preference checked,
however, they move to the nominal position. Aux and bus master
faders move to the nominal (0.0 dB) position regardless of this
preference.
Fader Start—When the Fader Start preference is checked, a MIDI Note
On message is transmitted when an odd-numbered channel fader is
raised from infinity (oo). See "Fader Start" on page 163.
Force SUB Boot—With this option checked, the 02R forces the SUB
CPU to boot each time the 02R is turned on. Check this option to
prevent the 02R from booting the SUB CPU when you select MIDI
Clock as the automix Time Reference, or assign a MIDI Remote page.
Since MIDI Remote page assignments are stored in scene memories,
the SUB CPU may boot when a scene memory containing MIDI
Remote parameters is recalled. Turning on the Force SUB Boot check
box will prevent this.
Preferences 1—Factory Settings
Option / Setting
Auto EQ Display
Auto PAN Display
Auto ROUTING Display
Auto AUTOMIX Display
Auto SOLO Display
Auto WORD CLOCK Display OFF TC Drop Warning OFF
Store Confirmation
Recall Confirmation
Remote Talk Back (C3)
Transmit Key Remote
Insert Tx Bulk Wait
Option / Setting
ON
Fast Meter Fall Time
ON
CR Level to MB02
ON
Pre Fader Direct Out
OFF Pre EQ Direct Out
OFF Slate Tone
ON
DIO Warning OFF
OFF MIDI Warning OFF
OFF Initial Data Nominal
OFF Fader Start
OFF Force SUB Boot
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF

Advertisement

Table of Contents
loading

Table of Contents