Yamaha O2R Owner's Manual page 82

Recording the First Session
1. Use the [AUTOMIX] button to locate the AUTOMIX 1/7 page.
AUTOMIX
2. Select the "REC" (record) icon with the CURSOR buttons and
press the [ENTER] button.
The "REC" icon will flash, indicating AUTOMIX RECORD READY status:
3. Press the [SEL] buttons for the tape return channels you want to
record.
The LED inset in the selected channel [SEL] buttons flash indicating that
they are armed for recording.
Note: Remember the scene memory you recalled has the [FLIP] function
engaged. Therefore you should be selecting the [SEL] buttons in the row above the
faders.
4. Start the device that is providing the timecode.
It should start from a location before the music starts.
Note: The 02R automix function will not respond correctly in cases where the
source timecode starts at "23:59:30.00" and rolls over to "00:00:00.00". The
timecode must be continuous.
When timecode is received when the 02R is in AUTOMIX RECORD
READY status, the "REC" icon is highlighted and automix recording will
Mixing and Automix
02R Getting Started Guide
73