Yamaha O2R Owner's Manual page 317

Digital I/O, Setup, and Utilities 207
Likewise, if a slot is configured for 24bit MODE,
all buses are assigned to the card inputs, and you
attempt to select a card input, the confirmation
dialog box shown here appears. Choose
EXECUTE to cancel all the bus assignments.
Shown below is the MIC 1–8 page of SCENE 4/5. On this page you can
select internal or slot 3 inputs from 1 to 8. The Input Select parameters INT
ANALOG and CARD SLOT 3 also appear on the DIGITAL I/O 2/5 (Input
Signal Select) page.
Shown below is the MIC 9–16 page of SCENE 4/5. On this page you can
select internal or slot 4 inputs from 9 to 16. The Input Select parameters INT
ANALOG and CARD SLOT 4 also appear on the DIGITAL I/O 2/5 (Input
Signal Select) page.
Input Patching settings are stored in scene memories.
02R User's Guide