Yamaha O2R Owner's Manual page 284

174 MIDI
02R User's Guide
There are two pages for 03D remote control. Pages can be selected using the
page icon at the right hand side of each page, or by operating a control on
that page. For example, operating fader 16 displays the first page, while
operating fader 17/18 displays the second page.
When the 02R or 03D is first connected, or turned on, use the CONNECT
function to update the 02R controls so that they match those of the 03D.
When the CONNECT function is used, the settings from the 03D are copied
to the 02R.
Scene memories on the 03D can be recalled from either page. To do this, use
the PGM parameter to select a MIDI Program Change from 0 to 127. When
the RCL icon is pressed, the corresponding scene memory is recalled on the
03D, and the 02R controls move to their new positions. The SCENE number
and TITLE parameters do not change until the scene is recalled. Then they
display the scene memory number and title. The 02R fader positions
correspond to fader positions on the 03D. Likewise, the indicators in the
02R [ON] buttons show which channels on the 03D are turned on and
which are turned off.