Metering - Yamaha O2R Owner's Manual

1. Use the [METER] button to
select the METER pages.
METER
2. Select a channel using
the [SEL] buttons or the
CURSOR buttons.
3. Use the CURSOR buttons
to select the PEAK HOLD
icon and press the
[ENTER] button to switch
the function on or off.
4. Select one of the meter
source point
icons—PRE EQ,
POST EQ, or
POST FADER—with the
CURSOR buttons. Make it
the current meter point
by pressing the [ENTER]
button.

Metering

The 02R features comprehensive signal level metering. The mono and
stereo input channels, the tape and effect returns, and the auxiliary sends
and buses are all metered using the METER display function. The control
room output is metered using the dedicated 21-segment LED meters. Peak
hold is available for all meters.
Meter Pages
There are three pages to the METER function. The first page, shown below,
contains the meters for MIC/LINE channels 1 to 24, and appears when one
of these channels is selected.
The second METER page, shown below, contains the meters for TAPE
channels 1 to 16 and effects returns (EFF 1 and EFF 2), and appears when
one of these channels is selected.
MIXING Display Functions 41
02R User's Guide