Applying Eq - Yamaha O2R Owner's Manual

24 Introductory Recording Tutorial
SEL
EQ
02R Getting Started Guide

Applying EQ

The next step is to apply EQ to MIC/LINE 1.
Each 02R channel features a four-band fully parametric EQ, with variable
bandwidth (Q), frequency (F), and gain (G). The power of the 02R user
interface means that there are two ways of adjusting the EQ for
MIC/LINE 1.
One method is to use the EQ 1/2 page.
The more convenient method is to use the buttons and controls of the
EQUALIZER block of the SELECTED CHANNEL controls.
LOW/HPF L-MID H-MID
EQ ON
Note: You can customize your 02R so that when you adjust a control of the EQ
block of the SELECTED CHANNEL controls, the EQ 1/2 page automatically
appears. See "Preferences" on page 198 of the User's Guide for more information.
The default setting is to automatically display the EQ page.
The rest of this tutorial describes the operation of the EQ 1/2 page.
Turning the EQ ON/OFF
1. Press the [SEL] button for MIC/LINE 1.
When you press the [SEL] button for a channel, the LED and numeric
indicators of the SELECTED CHANNEL controls change to reflect the
status of the channel you selected.
2. Press the [EQ] button.
HIGH/LPF
Hz kHz
dB
EQUALIZER
Q
F
G