Selected Channel Controls - Yamaha O2R Owner's Manual

SELECTED CHANNEL Controls

These controls are very similar in setup to the controls of an analog mixer.
You may find working with the buttons and controls of this section of the
02R is much faster and more intuitive than working through the pages of
the DISPLAY ACCESS functions.
ROUTING buttons
1 2
3 4
5 6
7 8
ST DIRECT
ROUTING
The routing buttons allow you to directly select the destination for the
selected channel. The LEDs in the buttons illuminate to indicate the status
of the channel.
Note: You can customize your 02R so that when you adjust any of the
controls in this group, the display switches to the ROUTING page. See
"Preferences" on page 198 of the User's Guide.
AUX controls
AUX 1 AUX 2
AUX 3 AUX 4
AUX 5 AUX 6
AUX 7 AUX 8
EFF1 EFF2
SEND LEVEL ON
AUX
The AUX buttons allow you to select the auxiliary buses you want to send
the selected channel signal to. The SEND LEVEL rotary encoder is used to
set the level —indicated by the adjacent LED bargraph. The [ON] button is
used to turn the send on or off. This allows you to make quick A-B
comparisons.
User Interface
02R User's Guide
23