Yamaha DM2000 Owner's Manual page 9

• The Oscillator can output sine wave signals with different frequencies to the L and R chan-
nels and odd and even buses. → page 279
• You can set the Auto Direct Out On check box so that if you change a channel's Direct Out
destination, the channel Direct Out will automatically be enabled. → page 276
• You can set the Routing ST Pair Link check box so that the routing from paired Channels to
the Stereo Bus is linked. → page 276
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Production Console
Model Name : DM2000
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference
that may cause undesired operation.
See user manual instructions if interference to radio reception is sus-
pected.
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
New Functions in DM2000 Version 2
(FCC DoC)
DM2000 Version 2—Owner's Manual
9