Pre-Fader Or Post-Fader Aux Sends; Setting Aux Send Levels - Yamaha DM2000 Owner's Manual

Pre-Fader or Post-Fader Aux Sends

Aux Sends can be configured individually as either pre-fader or post-fader on the Aux Send
pages (see page 112) or the Aux View pages (see page 115). If Aux Sends are configured as
pre-fader, you can position the send points before or after the [ON] buttons.

Setting Aux Send Levels

Aux Send levels can be set by using the SELECTED CHANNEL AUX/MATRIX SEND
LEVEL controls, the faders, or the Encoders.
Using the SELECTED CHANNEL AUX/MATRIX SEND LEVEL Controls
1 Use the LAYER buttons to select the Input Channel Layers, and use the [SEL]
buttons to select Input Channels.
2 Use the [BANK] button to select Aux 1–4, Aux 5–8, or Aux 9–12.
3 Use the LEVEL controls to set the Aux Send levels.
Using the Faders
1 Use the LAYER buttons to select the Input Channel Layers.
Press the FADER MODE [AUX/MTRX] button to select the Aux/Mtrx
2
Fader mode.
Use the AUX SELECT [AUX 1]–[AUX 12] buttons to select Aux Sends
3
1–12.
Use the faders to set the Aux Send levels.
4
Refer to the legend on the left side of the faders when setting Aux Send levels.
Using the Encoders
Use the LAYER buttons to select the Input Channel Layers.
1
Press the ENCODER MODE [AUX/MTRX] button to select the Aux/Mtrx
2
Encoder mode.
Use the AUX SELECT [AUX 1]–[AUX 12] buttons to select Aux Sends 1–12.
3
Use the Encoders to set the Aux Send levels.
4
Pre-Fader or Post-Fader Aux Sends
AUX / MATRIX SEND
DISPLAY
LEVEL LEVEL
BANK ON ON
1 1 2 2
AUX / MATRIX AUX / MATRIX
AUX 5 AUX 6
AUX 9 AUX 10
LEVEL LEVEL
ON ON
3 3 4 4
AUX / MATRIX AUX / MATRIX
AUX 7 AUX 8
AUX 11 AUX 12
DM2000 Version 2—Owner's Manual
111
10 0
5 5
0 10
5 15
10 20
15 30
20 40
30 50
40 60
50 70