Muting Channels; Panning Channels; Soloing Channels - Yamaha DM2000 Owner's Manual

Muting Channels

Channels can be muted as follows.
Use the [ON] buttons to mute channels.
1
The [ON] button indicators of muted channels go out.
Press the [ON] buttons again to unmute channels.
2
The [ON] button indicators of unmuted channels are lit.
Grouped channels are muted together. You can temporarily disable a group in order to
mute individual channels by pressing and holding the USER DEFINED KEYS [12]
(CTRL/CLUTCH) button.
The following shortcuts apply.
Mute all channels
Mute all selected channels

Panning Channels

Channels can be panned as follows.
Press the ENCODER MODE [PAN] (PAN) button.
1
Its indicator lights up.
Use the Encoders to pan the channels.
2
Pan positions are displayed by the channel strip displays. See "Pan Display" on page 227 for
more information.
You can view pan settings numerically on the channel strip displays by holding down the
USER DEFINED KEYS [13] (ALT/FINE) button while adjusting the Encoders.
For stereo aux input channels (i.e., channels with two panpots), use the ENCODER MODE
[PAN] (PAN) button to toggle between the left and right panpots, and pan with the
Encoder. When the left panpot is active, the ENCODER MODE [PAN] (PAN) button indi-
cator is lit continuously and the SELECT ASSIGN section of the display shows "Pan." When
the right panpot is active, the ENCODER MODE [PAN] (PAN) button indicator flashes
and the SELECT ASSIGN section of the display shows "PanR."

Soloing Channels

Channels can be soloed as follows.
1 Use the [SOLO] buttons to solo channels.
The [SOLO] button indicators of soloed channels light up and the [ON] button indicators
of unsoloed channels flash.
Press the [SOLO] buttons again to unsolo channels.
2
Grouped channels are soloed together. You can temporarily disable a mix group in order to
solo individual channels by pressing and holding the USER DEFINED KEYS [12]
(CTRL/CLUTCH) button.
To do this...
USER DEFINED KEYS [5] + [ON]
USER DEFINED KEYS [5] + USER DEFINED KEYS [4] + [ON]
Muting Channels
Do this!
DM2000 Version 2—Owner's Manual
241