About Plug-Ins - Yamaha DM2000 Owner's Manual

As of January 2004, the following Add-On Effect packages are available:
• AE011 Channel Strip Package
• AE021 Master Strip Package
• AE031 Reverb Package
Additional packages will be released in the future. Visit the Yamaha web site for the latest
information:
http://www.yamahaproaudio.com/

About Plug-Ins

There are two types of Plug-Ins: Waves Plug-Ins and User Defined Plug-Ins. Waves Plug-Ins
are available on Y56K cards, which need to be installed in the DM2000's mini YGDAI Slots
(Slots 4–6 only). See your Yamaha dealer for details. User Defined Plug-Ins can be used to
control up to 32 user definable parameters via MIDI Control Change or Parameter Change
messages on an external MIDI device, such as an external effects processor. Plug-In param-
eters can be controlled by using the four Parameter controls below the display. Plug-In
parameter settings are stored in Scenes, for snapshot-style automation.
When installing Y56K cards, mini YGDAI Slots 4–6 correspond to Plug-Ins 4–6, so if you
install, for example, a Y56K card in Slot #4, it's automatically configured as Plug-In #4.
DM2000 signals are patched through to the Y56K card's effect chains just like any other sig-
nal is patched through to a Slot Input or Output. Slot Outputs (i.e., effect chain inputs) can
be fed from the Bus Outs, Aux Sends, Matrix Sends, Stereo Out, or the Input and Output
Channel Insert Outs. Slot Inputs (i.e., effect chain outputs) can be fed to the Input Chan-
nels, or the Input and Output Channel Insert Ins. See "Input & Output Patching" on
page 77.
Settings for Y56K cards are stored in memory on the card when you store a Scene, and
recalled automatically during Scene recall. Please note, however, that these settings cannot
be stored in DM2000 Scenes. Therefore, the cards do not support Scene memory global
paste, sort, and other scene related functions.
Note: Y56K cards use Scenes #1–#96. If you store or recall Scenes #97 and up, the Y56K card
settings will not reflect the Scenes. (A warning message will appear.)
About Plug-Ins
DM2000 Version 2—Owner's Manual
179