Yamaha DM2000 Owner's Manual page 330

330
Appendix A: Parameter Lists
COMP 5.1
Six input, six output compressor for 5.1 surround, with individual solo for each band, and gain
reduction metering of left and right (L+R), left surround and right surround (LS+RS), center (C),
or LFE channels.
Parameter
LOW GAIN
MID GAIN
HI. GAIN
PRESENCE
THRE
RATIO
ATTACK
RELEASE
KNEE
LOOKUP
KEY LINK
L–M XOVR
M–H XOVR
SLOPE
CEILING
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s (fs=96 kHz)
2. 5.1: key-in of all inputs are linked. 5.0: key-in of the L, C, R, LS, and RS are linked (LFE is independent). 3+2: key-in
of L, C, and R are linked, and LS and RS are linked. 2+2: key-in of L and R are linked, and LS and RS are linked.
COMPAND 5.1
Six input, six output compander for 5.1 surround, with individual solo for each band, and gain
reduction metering of left and right (L+R), left surround and right surround (LS+RS), center (C),
or LFE channels.
Parameter
LOW GAIN
MID GAIN
HI. GAIN
PRESENCE
THRE
RATIO
ATTACK
WIDTH
TYPE
LOOKUP
KEY LINK
L–M XOVR
M–H XOVR
SLOPE
CEILING
1. 5.1: key-in of all inputs are linked. 5.0: key-in of the L, C, R, LS, and RS are linked (LFE is independent). 3+2: key-in
of L, C, and R are linked, and LS and RS are linked. 2+2: key-in of L and R are linked, and LS and RS are linked.
Other preset effects (COMP276, COMP276S, COMP260, COMP260S, EQUALIZER601, OPEN-
DECK, REV-X HALL, REV-X HALL, REV-X ROOM, REV-X PLATE) are optional Add-On
Effects. For more information on these effects, refer to the Owner's Manual that comes with the
Add-On Effects package.
DM2000—Owner's Manual
Range
–96.0 to +12.0 dB Low band level
–96.0 to +12.0 dB Mid band level
–96.0 to +12.0 dB High band level
For positive values, the threshold of the high band is lowered and the
–10 to +10 threshold of the low band is increased. For negative values, the oppo-
site will occur. When set to 0, all three bands are affected the same.
–24.0 dB to 0.0 dB Compressor threshold
1:1 to ∞:1
Compressor ratio
0–120 ms Attack
1
Expander release time
0–5 Compressor knee
0.0–100.0 ms Lookup delay
2
Key-in linking
21.2 Hz–8.00 kHz Low/mid crossover frequency
21.2 Hz–8.00 kHz Mid/high crossover frequency
–6 dB, –12 dB Filter slope
–6.0 dB to 0.0 dB, OFF Specifies the maximum output level
Range
–96.0 to +12.0 dB Low band level
–96.0 to +12.0 dB Mid band level
–96.0 to +12.0 dB High band level
For positive values, the threshold of the high band is lowered and the
–10 to +10 threshold of the low band is increased. For negative values, the oppo-
site will occur. When set to 0, all three bands are affected the same.
–24.0 dB to 0.0 dB Compressor threshold
1:1 to 20:1 Compressor ratio
0–120 ms Compressor attack
1–90 dB Width before the expander operates
Soft, Hard Compander type
0.0–100.0 ms Lookup delay
1
Key-in linking
21.2 Hz–8.00 kHz Low/mid crossover frequency
21.2 Hz–8.00 kHz Mid/high crossover frequency
–6 dB, –12 dB Filter slope
–6.0 dB to 0.0 dB, OFF Specifies the maximum output level
Description
Description