Mono Delay; Stereo Delay - Yamaha DM2000 Owner's Manual

MONO DELAY

One input, one output basic repeat delay.
Parameter Range
DELAY 0.0–2730.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
SYNC OFF/ON
1
NOTE
1.

STEREO DELAY

Two input, two output basic stereo delay.
Parameter Range
DELAY L 0.0–1350.0 ms
DELAY R 0.0–1350.0 ms
FB. G L –99 to +99%
FB. G R –99 to +99%
HI. RATIO 0.1–1.0
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
SYNC OFF/ON
1
NOTE L
NOTE R 1
1.
MOD. DELAY
One input, two output basic repeat delay with modulation.
Parameter Range
DELAY 0.0–2725.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine/Tri
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
SYNC OFF/ON
1
DLY.NOTE
2
MOD.NOTE
1.
setting)
2.
Description
Delay time
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine DELAY
(Max. value depends on tempo setting)
Description
Left channel delay time
Right channel delay time
Left channel feedback (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
Right channel feedback (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel DELAY
Used in conjunction with TEMPO to determine right channel DELAY
(Maximum value depends on the tempo setting)
Description
Delay time
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Modulation depth
Modulation waveform
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine DELAY
Used in conjunction with TEMPO to determine FREQ
(Maximum value depends on the tempo
311
Effects Parameters
DM2000—Owner's Manual