About The Display - Yamaha DM2000 Owner's Manual

52
Chapter 3—Operating Basics

About the Display

All DM2000 mix parameters can be edited on the various display pages.
Page title
Page #
Page area
Current Scene: The number and title of the currently selected Scene memory are dis-
played here. See "Storing & Recalling Scenes with the SCENE MEMORY Buttons" on page
187 for more information. If the selected Scene is write-protected, a padlock icon appears.
See "Using the Scene Memory Page" on page 188 for more information.
MIDI indicator: This indicator appears when the DM2000 is receiving MIDI data via the
MIDI IN port, USB TO HOST port, or SERIAL TO HOST port.
EDIT indicator: This indicator appears when the current mix settings no longer match
those of the Scene that was recalled last. It works in unison with the Edit indicator dot on
the SCENE MEMORY display. See "Edit Buffer & Edit Indicator" on page 185 for more
information.
Selected DISPLAY: This indicates the currently selected display page group, for example,
AUX, EQ, or AUTOMIX. Display page groups are selected by using the [DISPLAY] buttons.
Sampling rate/Surround mode: This indicates the current sampling rate—44.1 kHz
(44k), 48 kHz (48k), 88.2 kHz (88k), or 96 kHz (96k), and surround mode—6.1, 5.1, 3-1,
and ST.
Selected channel: The Input or Output Channel currently selected by the [SEL] buttons
is indicated here. See "Selecting Channels" on page 59. The first four characters are the
Channel ID (e.g., CH1–CH96, BUS1–BUS8, AUX1–AUX9, AX10–AX12, MT1L–MT4R,
ST-L, ST-R. The second four, are the channel's Short name. See "Naming Channels" on
page 156.
Channel name: Depending on the currently selected page, this is the Long name of
either the currently selected channel or the channel selected by the cursor buttons. On some
pages, the Aux Send pages, for example, it's possible to edit Aux Send levels without having
to select each Input Channel. Instead, Input Channel Aux Sends can be selected by using the
cursor buttons. In this case, the name displayed here is different to the name displayed in
the upper-right corner of the display.
Page title: This is the title of the currently selected page.
Page #: Depending on the group of pages currently selected, page numbers are displayed
here. For example, although you can view only one Input Channel 1–24 Aux Send page at
a time, there are in fact 12 Input Channel 1–24 Aux Send pages, one for each of the 12 Aux
Sends. Page numbers are also displayed when the following page groups are selected: Matrix
Sends, Effects, and GEQ.
DM2000 Version 2—Owner's Manual
EDIT indicator
MIDI indicator
Selected
DISPLAY
Current Scene
Page tabs
Sampling rate/Surround mode
Selected channel
Channel name
Page tab scroll arrows